The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 70 k20 build that somehow turned into a frame off resto-swap

rickcdewitt · 01-26-2022, 07:01 PM

Its been a long time since I've worked on the old girl. A series of other projects took precedence.I'd like to finally drive the old girl now though so I'll post some progress I've made recently.
I used squarebody crossmembers to hold the 31 gallon tank and skidplate. Front one went right in with a little tweaking and the rear one got sectioned for the shorter frame height frame in the 70.set the distance back so the fill neck goes between bed braces and has a straight shot to the blazer fuel door thats now in the passenger bedside.clears the diff and the taper on the tank is at the rear like it should be

01-26-2022, 07:01 PM	#71
rickcdewitt Registered User Join Date: Jan 2011 Location: Northern CA Posts: 163	Re: 70 k20 build that somehow turned into a frame off resto-swap Its been a long time since I've worked on the old girl. A series of other projects took precedence.I'd like to finally drive the old girl now though so I'll post some progress I've made recently. I used squarebody crossmembers to hold the 31 gallon tank and skidplate. Front one went right in with a little tweaking and the rear one got sectioned for the shorter frame height frame in the 70.set the distance back so the fill neck goes between bed braces and has a straight shot to the blazer fuel door thats now in the passenger bedside.clears the diff and the taper on the tank is at the rear like it should be Attached Images __________________ 1970 k20 6.0l/nv4500/np205/14bff in progress build linkhttp://67-72chevytrucks.com/vboard/s...d.php?t=677014 Last edited by rickcdewitt; 01-26-2022 at 11:16 PM.