[Carryallnuts]

I used the 69-72 style. The holes in those are larger, so I enlarged the holes in the steel frame mounts. I then made a steel spacer, just like original, but the same diameter as the 67-72 mounts. I made 10 all together, but 2 of them were longer than the other 8. In retrospect I would have installed them without the extra trouble of making spacers. I don't see them moving once they are installed and tight and I could have glued them down. Or I would have gone to a place in El Cajon, Cal. that sells everything and anything rubber and I would have made my own. They are a little over 9/10 of an inch with a vulcanized piece of rectangular steel that is 1/8 of an inch thick. I played around with making urethane ones but i did not like how rigid they were. Mine's a 4x4 so I wanted a bit more flex and I was afraid that it would create stress cracks in the body. For the front ones you can use truck mounts and you are 20% there.