The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Replacing my resistor wire with HEI power supply wire, in pictures

Sturvin · 06-19-2016, 08:27 PM

Sure, post this a month after I convert my truck...

But good write up though, I'm glad you showed re-pinning the harness, definitely the right way to do it.

Fun fact, a standard spade connector will work in place of a Packard 56 if you can't find one. And I sealed my harness up with hot glue afterwards.

06-19-2016, 08:27 PM	#9
Sturvin Registered User Join Date: Jul 2015 Location: WI Posts: 39	Re: Replacing my resistor wire with HEI power supply wire, in pictures Sure, post this a month after I convert my truck... But good write up though, I'm glad you showed re-pinning the harness, definitely the right way to do it. Fun fact, a standard spade connector will work in place of a Packard 56 if you can't find one. And I sealed my harness up with hot glue afterwards.