The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

focusedontheprize · 06-14-2020, 07:32 PM

The exhaust was the last thing I needed to check off. I began to disassemble the rear of the truck in preparation for final weld and paint.

Wire wheeled and brought it down to bare metal..

I thoroughly cleaned everything and wanted to try out the Magnet Paint Chassis Saver. Here is the first coat..

06-14-2020, 07:32 PM	#89
focusedontheprize Registered User Join Date: Feb 2012 Location: CA Posts: 846	Re: "Dixie" 1988 Chevrolet V30 3+3 Dually The exhaust was the last thing I needed to check off. I began to disassemble the rear of the truck in preparation for final weld and paint. Wire wheeled and brought it down to bare metal.. I thoroughly cleaned everything and wanted to try out the Magnet Paint Chassis Saver. Here is the first coat.. __________________ "Dixie" - 1988 Chevrolet V30 CC DRW "3+3" \| 7.4L 454 (L19) \| TH400 \| 4" lift \| 35"s "Lucille" - 1949 Chevrolet 3100 (on hold) Last edited by focusedontheprize; 06-14-2020 at 09:58 PM.