Yes, if you be sure to have slot line up with clamp opening you will be OK. Or you can rotate clamp so that the gap in slot is completely under clamp, either way will work as long as the gap is not half way under clamp. Clear as mud, eh? As far as specs go this is what I have,
Camber: Designed to be + 1-1/2 degrees at curb weight with no provision for resetting.
Caster: Designed to be + 4 degress at curb weight with no provision for resetting.
Toe-in (total) for resetting 1/8" to 1/4".
for checking 1/16" to 5/16".
I hope I was of some help. Good luck!
------------------
1971 C10 swb stepside 350/700R4/3.73posi
__________________
1971 C10 swb stepside 350/700R4/3.73posi (retired as of 4/22/03)
1998 S10 short bed
2002 S10 Blazer
1942 Oldsmobile
1958 Massey Harris Pony
1951 Wife
Killingworth, Connecticut
May those who love us, love us, any of those who do not love us, may God turn their hearts.
And if God is unable to turn their hearts, may he turn their ankles so we may know them by their limping.
A man who works with his hands is a laborer; a man who works with his hands and his brain is a craftsman; but a man who works with his hands and his brain and his heart is an artist.
|