[nicklear36]

Got the vacuum lines cleaned up on the ol/ carb. Wire plugs are installed, headers, and power steering pump.

I was also able to clear the bottom of the oil pan with a new Hotchkis drag link. It is straight and doesn't have an arc like the stock link, which they say helps with bump steer too. I had to dent the bottom lip of the oil pan about an inch to clear still. But all things considered this was the least invasive method to get this raised steering to work without forking out for rack and pinion.

Still have lots to do, such as a custom electronic parking brake, fuel line, and class III towing hitch.