|
Re: $900
While on the carburetor, I find that the TV cable from the tranny doesnt get enough tension to set itself correctly, and the throttle cable has almost an inch of slack in it at rest. They both hook up to the same bracket of course so this ones a no-brainer. So I welded on a new tab where it bolts to the manifold and drilled new holes 7/8" away from the old ones. That worked perfect. The TV cable pulled the housing out about a half inch, right where it should be and the slack on the throttle cable is next to nothing now.
I cant find my pics of it, but its just an ugly little bracket anyway
|