Quote:
Originally Posted by Joe69C10
Bringing back an old tread! Great write up. This will help me alot. Question: You are using the corvette style filter w/ return that you can mount near the tank. I'm swapping a truck 5.3 with the return already on the truck intake.
Would I just use a regular filter that is not a return style? and run two long fuel lines from the intake? Since the truck intake has a regulator built in along with return.
|
This was set up for the return style lines on the intake. I did not use the corvette style return filter.
I just ran two -6 lines from the tank up to the rails. One for supply and one for return. That set up worked with a pump upgrade to a Walbro 400 style pump and made over 515 ft lbs of torque before blowing a head gasket...
