|
Re: 67 C10 V8 Correct Exhaust Manifolds
Quote:
Originally Posted by MikeB
That makes sense with an engine mounted in the forward position, because the driver's side heads sits farther forward than the passenger side. So the angle is needed to clear the motor mount (or cross member?) -- I forget which. I just remember trying straight ones on my 69 C10 and there was no room for a down pipe on the driver's side. Then again, I was trying to install 2.5" rams horns, which have a much larger body.
|
My situation exactly. With these manifolds I had less than 1/4" clearance from the motor mount. I had to splice and cut a bend but to clear the crossmember but it didn't make for a very pretty bend. A bit of an irregular shape.
__________________
1966 C10 Custom Cab Restomod (Sold)
1969 Camaro Z/28 (Keeper)
Current Build: 1968 C10 (Semi-Factory Restoration)
1983 Camaro Z/28 (Next in line, Keeper)
1951 3100 (2nd in line)
|