The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Driver_WT · 02-19-2021, 11:55 PM

I have slightly warped a sheet metal piece for my fabricated console (goes around the shifter and up to the dash. The weld is up the middle of the piece and it now has a slight dip in it. Can someone provide or point me to some hammer and dolly basics for getting the dip out?

Thanks.

02-19-2021, 11:55 PM	#1
Driver_WT Registered User Join Date: Dec 2017 Location: River John, NS Posts: 448	Hammer and Dolly Basics I have slightly warped a sheet metal piece for my fabricated console (goes around the shifter and up to the dash. The weld is up the middle of the piece and it now has a slight dip in it. Can someone provide or point me to some hammer and dolly basics for getting the dip out? Thanks. __________________ 53 Chevy 3100, SBC 355, 700R4, S10 frame, Ford 8.8 rear with 4.11 gears, front disc & rear drum brakes