The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Subaru bucket seats & a console without any new holes to my floor

SeniorVerde · 11-04-2014, 02:26 PM

I wasn't wild about the front rail of my bracket. It was too visible and felt like it crowded the cab, too close to the trans hump and really didn't serve a purpose there in the middle. I mocked in the console after the driver's seat was mocked and with the console in place, I could tell that I would be safe with an indent.
So I C clamped a long 2x4 along the front of my bracket so it would stay in shape and welded in an indent. I cleaned up my booger welds while the thing was out too.

11-04-2014, 02:26 PM	#6
SeniorVerde Registered User Join Date: Dec 2010 Location: Carnation, Wa Posts: 142	Re: Subaru bucket seats & a console without any new holes to my floor - How I did it I wasn't wild about the front rail of my bracket. It was too visible and felt like it crowded the cab, too close to the trans hump and really didn't serve a purpose there in the middle. I mocked in the console after the driver's seat was mocked and with the console in place, I could tell that I would be safe with an indent. So I C clamped a long 2x4 along the front of my bracket so it would stay in shape and welded in an indent. I cleaned up my booger welds while the thing was out too.