The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**SOON2BLAZE** · 01-20-2023, 05:48 PM

The filler neck is 2.5" below the rear bed cross panel and 2" below the top of the license plate bracket. It is possible to gain 1-1.5 " if different tubing was used above the tank. I used 1x3 but 1x2 would work.

01-20-2023, 05:48 PM	#40
SOON2BLAZE Account Suspended Join Date: Aug 2005 Location: Southern UT Posts: 906	Re: Project Old Colorado The filler neck is 2.5" below the rear bed cross panel and 2" below the top of the license plate bracket. It is possible to gain 1-1.5 " if different tubing was used above the tank. I used 1x3 but 1x2 would work.