[JPBrecheisen]

Originally Posted by jumpsoffrock

He Jonathon, here's a pic of my truck with those exact wheels from Wheels Now on them. Here's also some general information.

They are not exact replicas of the Accuride wheels. All of the lug holes were too small and I had to ream each of them out. Once reamed the wheels immediately fit correctly.

I emailed Wheels Now and they helped me out with the cost of a piloted reamer. They also confirmed what I was saying with regard to hole diameter--which they initially doubted: The diameters are NOT identical.

I can't seem to find the email, but I do remember that the Accuride diameters were something like .612", and the new Wheels Now had a diameter of ~.581".

What I used was a #2 Morse Taper ("2MT") piloted reamer. This is the exact unit/company I used: http://www.westtool.com/default.aspx...82&catlist=491

It just so happens that the 2MT has almost those exact dimensions! http://littlemachineshop.com/reference/tapers.php
.572" small end with a .7" big end.
Worked perfect, and believe it or not, cut the easiest and fastest by hand. Use cutting oil.

Thank you for this information. I am certain I will find this a helpfu "heads up".

Jonathon