this is what the fenders used to look like, then i used 80 grit and a wire wheel to take it all down and now im starting to fill
this is down to bare metal
i had the turn signal holes welded up
The camera is down at the garage so i dont have pics of the body filler and work. I am working on the driver side fender now, i sprayed the inner fender with spray undercoating and must say it rocks. I taped it off more than i needed to and will come back with semi-flat paint so i can cover it all and so the spot where the inner fender meets fender and rad support it doesnt have problems because of the coating. After i get the driver fender done, (metal etch primer then epoxy primer) i will test fit the running boards and get those in expoxy primer.