|
Re: 62 c20 power steering / 235 - need some smart people.
I decided to make an internal reinforcement plate on the inside of the frame. I used a piece of 3/16" flat stock I had. I might have made it bigger, but this is all I had...actually worked great. I got everything bolted up and then welded it all up hard. You can see on the one pic that angled area on the inside of the frame I had to cut out. I also had to buy 3 - 4.5" 7/16" bolts to replace the ones that came with the kit. Since I was going through the entire frame I obviously needed longer ones.
This is as far as I got today. Hopefully more tomorrow.
Matt
|