View Single Post
Old 11-16-2021, 12:54 AM   #5
Pick121
Registered User
 
Pick121's Avatar
 
Join Date: Jan 2021
Location: Tahoe City, CA
Posts: 166
Re: Pulling out the C60 Farm Truck

What a great story, bringing Dad’s truck back to life! I recently got a 1963 C50 started after it sat for 20 years in my neighbors yard. Here is the list I used to get it going. I actually hooked up a temporary fuel tank to bypass the behind seat tank. I was successful, on day 2 anyway! What a feeling it was having the engine fire up for the first time and drive it across the street to my ranch. Anyway, here is the list I used
Start C50
1. Turn engine nut/rotate eng (see if it’s siezed)
2. Replace crankcase oil & filter
3. Squirt oil can/marvel mystery oil into spark plug holes
4. Rotate engine by hand (lubricate piston cylinders)
5. New Spark plugs
6. New Spark plug wires, points, condenser, distrib cap
7. Clean air filter/housing/carb
8. Clean fuel/filter/temporary tank
9. Check coolant level in radiator/quality

Battery
Start it up! If it runs then:
9. Rubber hoses: radiator, heater hoses (if any), vacuum, fuel lines
10. Clean coolant-radiator flush, replace thermostat
11. Replace Fan belts
12. Brakes/brake fluid
14. Trans fluid
15. Rear end fluid
16. Adjust timing 4°BTDC, plug vacuum
17. Compression test 140psi

https://67-72chevytrucks.com/vboard/...d.php?t=826705

Send more pics if you have them, engine compartment, side emblems we can figure out what year yours is

Last edited by Pick121; 11-16-2021 at 01:04 AM.
Pick121 is offline   Reply With Quote