The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Doing LS Swap

Rich84 · 01-12-2021, 09:51 AM

If you are using a slider type mount you can slide the engine forward enough to make the compressor fit. It wasn't that much. If your going to use a factory compressor put the bracket on now. It's difficult to get to one of the bolts without jacking up the engine. If your going with a Vintage Air type unit don't put the bracket on now. I have an F-Body pan. I don't know with the pan you are using if this is an option.

01-12-2021, 09:51 AM	#141
Rich84 Registered User Join Date: Mar 2012 Location: Woodbury, Ct. Posts: 1,663	Re: Doing LS Swap - I have no idea what I'm doing! If you are using a slider type mount you can slide the engine forward enough to make the compressor fit. It wasn't that much. If your going to use a factory compressor put the bracket on now. It's difficult to get to one of the bolts without jacking up the engine. If your going with a Vintage Air type unit don't put the bracket on now. I have an F-Body pan. I don't know with the pan you are using if this is an option.