The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Wiper Motor Install (Grommets, Seals, Timing Marks)

**Rich72C10** · 01-02-2021, 12:32 PM

I'd suggest heading to the Testing Windshield Wiper Motors thread. While it's a tight fit up in there, with a little patience and long wires you could. It would be exponentially harder if you don't have the radio out (or if you don't have a radio hole at all).

01-02-2021, 12:32 PM	#7
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,643	Re: Wiper Motor Install (Grommets, Seals, Timing Marks) I'd suggest heading to the Testing Windshield Wiper Motors thread. While it's a tight fit up in there, with a little patience and long wires you could. It would be exponentially harder if you don't have the radio out (or if you don't have a radio hole at all). __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim