[rnrdthefox]

For the seat belts, I used the ones out of the donor escalade as they are already attached to the seat. One think I like about them is the shoulder height adjustment. This makes it nice for myself and to boss to drive. I used 1/4" bar stock about 3" long as the mounting brackets in the b-pillars. I tapped them and welded a nut on them. Finally, I radiused the edges (not pictured) to match the inside of the pillar incase of an accident, they don't act as a cutting edge.

I will bolt the seat belt spools in the cab corners on the inside wall. I'm waiting to do this work when I open the cab corners for better access. Hopefully that will be done on the next update.