|
Re: 2 inch drop spindle or maybe not??
After finding flat level ground, measure & record the distance from the fender lip to the ground all 4 corners. Take pix of the measurement presently of the lower control arm to the ground. It may have heavy half or bigger coils. You may trim 1 full wrap for a 2 inch drop. That will firm up but not harshen the ride. Of course that then would require the rear coming down same amount for a near level ride. Most use the flip kit, but consider the present leaf pack (pix would help again) thickness. The thicker the leaf pack the more drop when putting the rear axle on top of them.
|