[oldman3]

71Step, just came across this thread. I have a pedal from a 2005 GMC Yukon that was the same as yours. What I did was remove the plastic part for changing the pedal postion. Cut off the upper part of metal at top, and also upper part of the pedal arm. Used the hole where the plastic piece was, drilled hole in pedal arm and bolted together. After installing and adjusting pedal where it felt good I made a stop so that it moved the main parts. (This could be welded but I didn't.) This isn't a very good explanation, but hopefully the pics will help. Any questions let me know...Jim

Pic 1 was when I first installed in truck.

Next three pics are close ups I took today.