|
Re: 1972 Chevy K20 Extended Cab Cummins Build
got the rear cab tacked to the suburban, we made an 8 inch long inner support manel to tie the two together and even with a few welds seems very strong, the mock window pillar is also welded in until we use a full other pillar to weld into the door like the original, the two line up real well. mucking up the cab corner to make sure everything fits an then lock down the drivers side so we can make that door. also I buffed out the original Ochre door that will contribute to the fourth door to look at it in person. I was set on blue but I have always liked the yellow and I think that is the direction I will go, with the white top and no trim.
|