The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

AcampoDave · 01-08-2023, 02:10 AM

I don't have an oil pan recommendation but I have learned the importance of having a set of valvecovers with a real baffle for the pcv. I used to wonder where the heck my oil was going then I saw this: http://mewagner.com/?p=1221 . That write-up was the reason I switched my fancy aluminum covers which had homemade baffles (if you call them that) similar to design #2 for the metal ones I got from Speedway Motors. (See post 31 in this thread). Those have a real baffle similar to OE valvecovers.

01-08-2023, 02:10 AM	#43
AcampoDave Registered User Join Date: Feb 2013 Location: central California Posts: 2,728	Re: Engine Removal Prep Questions/Advice I don't have an oil pan recommendation but I have learned the importance of having a set of valvecovers with a real baffle for the pcv. I used to wonder where the heck my oil was going then I saw this: http://mewagner.com/?p=1221 . That write-up was the reason I switched my fancy aluminum covers which had homemade baffles (if you call them that) similar to design #2 for the metal ones I got from Speedway Motors. (See post 31 in this thread). Those have a real baffle similar to OE valvecovers. Last edited by AcampoDave; 01-08-2023 at 02:20 AM.