WTB Torque converter - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rlm316 · 02-26-2009, 09:26 AM

I need a torque converter for a '89 700r4 tranny. Either new or gently used. I would like to use approx 1800 stall.
Thanks, Lane

rlm316 · 02-27-2009, 07:24 AM

ttt

STOCKISH · 02-27-2009, 11:01 AM

I have a 1600 stall for a 94 4l60e. I heard alot of them interchange. If so, $40 plus shipping. Only #s on it are dghf2420 and 0411. LMK

rlm316 · 02-27-2009, 12:36 PM

Can you count the splines? I'll count the shaft. Is this used or new?

STOCKISH · 02-27-2009, 01:29 PM

Used. 27 spline on the larg part of the input shaft. I think 28 on the small shaft.

rlm316 · 02-27-2009, 01:58 PM

Why was it removed from the original tranny? Just want to make sure that it is clean inside, no metal or junk from the donor trans. Thanks

STOCKISH · 02-27-2009, 03:00 PM

Bought a lt1 and 4l60e to put in my 72. I rebuilt the engine and trans because I just didnt want to put stuff in there without rebuilding it. I dont know the miles but it drove and shifted fine. Will this fit your trans for sure?

rlm316 · 02-27-2009, 03:05 PM

I need to count the splines. I am at work, when I get home I will check. If it is the same, I'll take it. I will reply to the thread tonight.
Thanks, Lane

rlm316 · 02-28-2009, 06:54 AM

I've got 27 and 29. If that is the same I'll take it. Shipping to 08098.
Thanks, Lane

STOCKISH · 02-28-2009, 11:12 AM

# of splines are on which shaft, ie...large or small. I will re-count them Monday when I go back to work.

rlm316 · 03-02-2009, 07:50 AM

27 on the large, 29 on the small.

STOCKISH · 03-02-2009, 09:12 AM

I had one of my techs. count them this morning. He said it has 27 on the large and 29 on the small. So, I will try to get you a shipping quote by the end of the day. We got alot of snow last night so bear with me. PM me your shipping address and I will do my best to get you a quote today. Thanks

rlm316 · 03-02-2009, 09:58 AM

PM sent.

STOCKISH · 03-02-2009, 11:27 AM

pm returned

rlm316 · 03-02-2009, 02:37 PM

PM sent.

STOCKISH · 03-02-2009, 02:39 PM

Returned. Will ship out today. Thanks for your business Lane.--Josh

02-26-2009, 09:26 AM	#1
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	WTB Torque converter I need a torque converter for a '89 700r4 tranny. Either new or gently used. I would like to use approx 1800 stall. Thanks, Lane

02-27-2009, 07:24 AM	#2
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: WTB Torque converter ttt

02-27-2009, 11:01 AM	#3
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: WTB Torque converter I have a 1600 stall for a 94 4l60e. I heard alot of them interchange. If so, $40 plus shipping. Only #s on it are dghf2420 and 0411. LMK __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

02-27-2009, 12:36 PM	#4
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: WTB Torque converter Can you count the splines? I'll count the shaft. Is this used or new?

02-27-2009, 01:29 PM	#5
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: WTB Torque converter Used. 27 spline on the larg part of the input shaft. I think 28 on the small shaft. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

02-27-2009, 01:58 PM	#6
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: WTB Torque converter Why was it removed from the original tranny? Just want to make sure that it is clean inside, no metal or junk from the donor trans. Thanks

02-27-2009, 03:00 PM	#7
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: WTB Torque converter Bought a lt1 and 4l60e to put in my 72. I rebuilt the engine and trans because I just didnt want to put stuff in there without rebuilding it. I dont know the miles but it drove and shifted fine. Will this fit your trans for sure? __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

02-27-2009, 03:05 PM	#8
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: WTB Torque converter I need to count the splines. I am at work, when I get home I will check. If it is the same, I'll take it. I will reply to the thread tonight. Thanks, Lane

02-28-2009, 06:54 AM	#9
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: WTB Torque converter I've got 27 and 29. If that is the same I'll take it. Shipping to 08098. Thanks, Lane

02-28-2009, 11:12 AM	#10
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: WTB Torque converter # of splines are on which shaft, ie...large or small. I will re-count them Monday when I go back to work. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

03-02-2009, 07:50 AM	#11
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: WTB Torque converter 27 on the large, 29 on the small.

03-02-2009, 09:12 AM	#12
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: WTB Torque converter I had one of my techs. count them this morning. He said it has 27 on the large and 29 on the small. So, I will try to get you a shipping quote by the end of the day. We got alot of snow last night so bear with me. PM me your shipping address and I will do my best to get you a quote today. Thanks __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

03-02-2009, 09:58 AM	#13
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: WTB Torque converter PM sent.

03-02-2009, 11:27 AM	#14
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: WTB Torque converter pm returned __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

03-02-2009, 02:37 PM	#15
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: WTB Torque converter PM sent.



Register or Log In To remove these advertisements.

03-02-2009, 02:39 PM	#16
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: WTB Torque converter Returned. Will ship out today. Thanks for your business Lane.--Josh __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

Register or Log In To remove these advertisements.