looking for 67-72 gmc long bed stepside !!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

qatar2004 · 05-23-2011, 05:16 AM

hey good afternoon every one ..!!

i have been surfing the net looking for a LONGBED GMC STEPSIDE 67-72

i notes that it's rare ..

if anyone know where to find them ..!!

please hit me up

thaaanks !!!!

Jeffs70 · 05-23-2011, 07:09 AM

there is always ebay or craigslist in your local area's or try the forums http://67-72chevytrucks.com/vboard/c...ndex.php?cat=8

**70cst** · 05-23-2011, 09:03 AM

Keep an eye in the FS area and you might see one pop up. Good Luck

On a side note...as a premium member you could post a WTB (want to buy) then you would have the full force of this site knowing that you were in the market for a 67-72 gmc long bed stepside . Just a thought and again best of look in your search.

674x4ton · 05-23-2011, 09:05 AM

A good rust free long stepside is hard to find.

**special-K** · 05-23-2011, 09:06 AM

They are the uncommon one...all LWB Stepsides,especially the Fendersides. If it doesn't matter that it's factory original,you can buy all the parts to build a Fenderside and slap it on any common LWB Wideside.

**70cst** · 05-23-2011, 09:31 AM

Hey qatar2004 ... I forgot.

and

from Ohio...

Jeffs70 · 05-23-2011, 09:53 AM

Yes what 70cst said welcome to the forums

wild4wheels · 05-23-2011, 10:59 AM

Here you go! In Phoenix, AZ
Not mine
http://phoenix.craigslist.org/cph/cto/2394833587.html

Chitown_hillbilly · 05-23-2011, 01:09 PM

Here's one in Chicago...
http://chicago.craigslist.org/chc/cto/2395248914.html

qatar2004 · 05-23-2011, 05:08 PM

thanks you guys you have been so helpfull

buy the way i am from qatar and i am in qatar NOW ..

this web side is the best , really ..!!

but I am Looking for GMC not chevrolet ( i know it's the same ) l want GMC !!

thanks you guys again !!!

Old Yeller 1970 · 05-23-2011, 09:21 PM

Welcome to the forum. I spent a week in Doha on business several years ago. It was my first trip to the Middle East and a great experience.

You can easily run nation wide searches of Craigslist with Search Tempest. Good luck.

crazy-101 · 05-23-2011, 10:27 PM

I have seen a few long steppers around in northern IL for sale, but most have the steps and fenders rusted out.

Like said before the steps are the hardest to find and if it has a factory spare tire mount on the side of the bed the fender is about impossible to find if its rusted.

I also have never seen a GMC long stepper, do not doubt they made them. My dad scored a 69 Chevrolet long stepper for $550 3 weeks ago

.

qatar2004 · 05-24-2011, 03:38 AM

old yeller

I hope you like it here in doha

thank you guys you are the best ,,,

71meangreenc10 · 05-24-2011, 10:54 AM

Quote:

Originally Posted by Chitown_hillbilly

Here's one in Chicago...
http://chicago.craigslist.org/chc/cto/2395248914.html

Yeah,
But the guy who is selling it is straight up not beinig honest in the add, how do I know, because I am the one who rebuilt that truck and he didnt pull anything out of a junk yard. He drove it out of my driveway....And he only paid 2300 for it and whined and cried about what I was selling it for and since he was a Soldier too, I let him have it for a cheaper price, then turns around and advertises for that much. No integrity, sad thing is he is suppose to set the example for younger Soldiers, some example......

Its a good truck, its in NC. Has alot of rust in it, but mechanically solid. Be warned.....

Smitty

**HeloCrewChief** · 05-25-2011, 09:25 AM

Theres one for sale here in Fayetteville at a used car lot on Honeycutt. I see it on my way to work everyday. Its a GMC long bed/step side. Dark blue. If your serious I can stop and take pictures and get some information for you. It's been there about a month.

**HeloCrewChief** · 05-25-2011, 04:38 PM

Heres the pictures. Stopped by really quick on the way to work. $1100 is what they want for it. I'm moving from here to California next week. I would pick it up myself if I were sticking around. Runs and drives. Super clean underneath. No rust on the floors or any of the cab supports. bed loos to be rust free as well as the roof and rain gutters. The only rust is in the cab corners and rockers. Looks to be a low mileage truck by looking at the pedals and the original sound deadener on the floor.

**HeloCrewChief** · 05-25-2011, 04:40 PM

more pictures

The Youngen · 05-25-2011, 08:31 PM

I dont mean to brag so sorry if it comes off that way but my donor truck is a

c20 2wd longbed stepside, originally with wood bed. It does not have the tire holder

. I imagine that is a rare find then?

qatar2004 · 05-26-2011, 03:46 AM

Quote:

Originally Posted by HeloCrewChief

Heres the pictures. Stopped by really quick on the way to work. $1100 is what they want for it. I'm moving from here to California next week. I would pick it up myself if I were sticking around. Runs and drives. Super clean underneath. No rust on the floors or any of the cab supports. bed loos to be rust free as well as the roof and rain gutters. The only rust is in the cab corners and rockers. Looks to be a low mileage truck by looking at the pedals and the original sound deadener on the floor.

thanks man ..

is it manual transsmition ..?? I don't know .... do think it's a good price ..?

OR I can get it with less than 1100$ ..??

do you recommed that truck ..???

thanks again

Old Yeller 1970 · 05-26-2011, 08:50 AM

Judging from the photos it's a three speed column shift manual.

bw4sale · 05-26-2011, 09:52 AM

Gotta love the long steppers. That's what got me into these trucks. My grandfather had a C20 longbed stepside on his farm. It was rusty and beat up. When he died we brought it home to my dad's farm and my brother and I got it running again. We would use it around there to haul brush and stuff. Eventually my dad sold it. Would love to see where it is now. Good luck with your search.

**HeloCrewChief** · 05-26-2011, 05:28 PM

I think it could be had for around $900. The guy didn't seem to firm on price. You wont find a running C10 for much cheaper than that. It is definately going to need alot of work to be a nice truck though. It is a 3 speed on the column and it was originally a I6 truck. I think the guy said it has a 350 in there now.

bbrock · 06-06-2011, 02:52 PM

Here is one on craigslist

http://losangeles.craigslist.org/sfv...423281391.html

Ryan5O · 02-13-2012, 06:24 PM

Ran across this today...

http://wenatchee.craigslist.org/cto/2849328854.html

K20chevy · 01-06-2013, 01:09 PM

Ok, now I´m asking for Help myself.... I am also looking for a long bed stepside, BUT GMC would be prefered over Chevy and to make it even harder, I want a K2500, so 3/4ton 4x4 with the spare tire mount on the drivers side and a manual tranny.

I know that is about as impossible to find as it gets, but in the north east, everything is rusted out... So if anyone has a truck like that or sees one PLEASE let me know! I would even spend some serious cash on one if I would find one!!!

Thanks guys!

05-23-2011, 05:16 AM	#1
qatar2004 Registered User Join Date: Apr 2011 Location: qatar Posts: 190	looking for 67-72 gmc long bed stepside !!! hey good afternoon every one ..!! i have been surfing the net looking for a LONGBED GMC STEPSIDE 67-72 i notes that it's rare .. if anyone know where to find them ..!! please hit me up thaaanks !!!!

05-23-2011, 07:09 AM	#2
Jeffs70 Registered User Join Date: Oct 2007 Location: Valley Springs, Ca Posts: 857	Re: looking for 67-72 gmc long bed stepside !!! there is always ebay or craigslist in your local area's or try the forums http://67-72chevytrucks.com/vboard/c...ndex.php?cat=8 __________________ My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=442487 My Picture Gallery http://67-72chevytrucks.com/gallery/...0&ppuser=36004

05-23-2011, 09:03 AM	#3
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,363	Re: looking for 67-72 gmc long bed stepside !!! Keep an eye in the FS area and you might see one pop up. Good Luck On a side note...as a premium member you could post a WTB (want to buy) then you would have the full force of this site knowing that you were in the market for a 67-72 gmc long bed stepside . Just a thought and again best of look in your search. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

05-23-2011, 09:05 AM	#4
674x4ton Registered User Join Date: Sep 2010 Location: st.joseph mo. Posts: 116	Re: looking for 67-72 gmc long bed stepside !!! A good rust free long stepside is hard to find.

05-23-2011, 09:06 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: looking for 67-72 gmc long bed stepside !!! They are the uncommon one...all LWB Stepsides,especially the Fendersides. If it doesn't matter that it's factory original,you can buy all the parts to build a Fenderside and slap it on any common LWB Wideside. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-23-2011, 09:31 AM	#6
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,363	Re: looking for 67-72 gmc long bed stepside !!! Hey qatar2004 ... I forgot. and from Ohio... __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

05-23-2011, 09:53 AM	#7
Jeffs70 Registered User Join Date: Oct 2007 Location: Valley Springs, Ca Posts: 857	Re: looking for 67-72 gmc long bed stepside !!! Yes what 70cst said welcome to the forums __________________ My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=442487 My Picture Gallery http://67-72chevytrucks.com/gallery/...0&ppuser=36004

05-23-2011, 10:59 AM	#8
wild4wheels Registered User Join Date: Jan 2001 Location: Queen Creek, Arizona Posts: 1,626	Re: looking for 67-72 gmc long bed stepside !!! Here you go! In Phoenix, AZ Not mine http://phoenix.craigslist.org/cph/cto/2394833587.html __________________ Dave aka "Wild" Current truck "Ida Mae" 71 K5 Blazer Former Trucks "Loretta" 71 Longbed (AZ) "Tanya" 69 Stepside (AZ) "Ferdinand" 71 Longhorn (SD) "Patches" 67 Panel (IA/ KY) "Rosita" 68 C30 (KY) Instagram @Wildforwheels @k5_klub @c10university Profile pic provided by Jeff Sundance

05-23-2011, 01:09 PM	#9
Chitown_hillbilly Registered User Join Date: Apr 2011 Location: Lockport, IL Posts: 27	Re: looking for 67-72 gmc long bed stepside !!! Here's one in Chicago... http://chicago.craigslist.org/chc/cto/2395248914.html

05-23-2011, 05:08 PM	#10
qatar2004 Registered User Join Date: Apr 2011 Location: qatar Posts: 190	Re: looking for 67-72 gmc long bed stepside !!! thanks you guys you have been so helpfull buy the way i am from qatar and i am in qatar NOW .. this web side is the best , really ..!! but I am Looking for GMC not chevrolet ( i know it's the same ) l want GMC !! thanks you guys again !!! Last edited by qatar2004; 05-23-2011 at 05:18 PM.

05-23-2011, 09:21 PM	#11
Old Yeller 1970 DON'T TREAD ON ME Join Date: May 2005 Location: Crosby County, TX Posts: 989	Re: looking for 67-72 gmc long bed stepside !!! Welcome to the forum. I spent a week in Doha on business several years ago. It was my first trip to the Middle East and a great experience. You can easily run nation wide searches of Craigslist with Search Tempest. Good luck. __________________ Old Yeller Last edited by Old Yeller 1970; 05-24-2011 at 09:28 AM.

05-23-2011, 10:27 PM	#12
crazy-101 Registered User Join Date: Jul 2009 Location: Lanark IL Posts: 66	Re: looking for 67-72 gmc long bed stepside !!! I have seen a few long steppers around in northern IL for sale, but most have the steps and fenders rusted out. Like said before the steps are the hardest to find and if it has a factory spare tire mount on the side of the bed the fender is about impossible to find if its rusted. I also have never seen a GMC long stepper, do not doubt they made them. My dad scored a 69 Chevrolet long stepper for $550 3 weeks ago . __________________ '68 Chevy C-10 50th '69 Chevy K-20 Long Stepper '95 Chevy K1500

05-24-2011, 03:38 AM	#13
qatar2004 Registered User Join Date: Apr 2011 Location: qatar Posts: 190	Re: looking for 67-72 gmc long bed stepside !!! old yeller I hope you like it here in doha thank you guys you are the best ,,,

05-25-2011, 09:25 AM	#15
HeloCrewChief Senior Member Join Date: Aug 2010 Location: North Alabama Posts: 1,033	Re: looking for 67-72 gmc long bed stepside !!! Theres one for sale here in Fayetteville at a used car lot on Honeycutt. I see it on my way to work everyday. Its a GMC long bed/step side. Dark blue. If your serious I can stop and take pictures and get some information for you. It's been there about a month. __________________ 1970 C10 to K20 conversion 1974 GMC Jimmy 1968 50th Anniversary Short Bed 1968 Chevelle 1964 Comet Caliente 1990 W250 Cummins

05-25-2011, 04:38 PM	#16
HeloCrewChief Senior Member Join Date: Aug 2010 Location: North Alabama Posts: 1,033	Re: looking for 67-72 gmc long bed stepside !!! Heres the pictures. Stopped by really quick on the way to work. $1100 is what they want for it. I'm moving from here to California next week. I would pick it up myself if I were sticking around. Runs and drives. Super clean underneath. No rust on the floors or any of the cab supports. bed loos to be rust free as well as the roof and rain gutters. The only rust is in the cab corners and rockers. Looks to be a low mileage truck by looking at the pedals and the original sound deadener on the floor. Attached Images __________________ 1970 C10 to K20 conversion 1974 GMC Jimmy 1968 50th Anniversary Short Bed 1968 Chevelle 1964 Comet Caliente 1990 W250 Cummins



Register or Log In To remove these advertisements.

05-25-2011, 04:40 PM	#17
HeloCrewChief Senior Member Join Date: Aug 2010 Location: North Alabama Posts: 1,033	Re: looking for 67-72 gmc long bed stepside !!! more pictures Attached Images __________________ 1970 C10 to K20 conversion 1974 GMC Jimmy 1968 50th Anniversary Short Bed 1968 Chevelle 1964 Comet Caliente 1990 W250 Cummins

05-25-2011, 08:31 PM	#18
The Youngen Registered User Join Date: Oct 2010 Location: Westbrook CT Posts: 81	Re: looking for 67-72 gmc long bed stepside !!! I dont mean to brag so sorry if it comes off that way but my donor truck is a c20 2wd longbed stepside, originally with wood bed. It does not have the tire holder . I imagine that is a rare find then?

05-26-2011, 08:50 AM	#20
Old Yeller 1970 DON'T TREAD ON ME Join Date: May 2005 Location: Crosby County, TX Posts: 989	Re: looking for 67-72 gmc long bed stepside !!! Judging from the photos it's a three speed column shift manual. __________________ Old Yeller

05-26-2011, 09:52 AM	#21
bw4sale Registered User Join Date: Sep 2006 Location: Hendersonville, TN Posts: 1,528	Re: looking for 67-72 gmc long bed stepside !!! Gotta love the long steppers. That's what got me into these trucks. My grandfather had a C20 longbed stepside on his farm. It was rusty and beat up. When he died we brought it home to my dad's farm and my brother and I got it running again. We would use it around there to haul brush and stuff. Eventually my dad sold it. Would love to see where it is now. Good luck with your search. __________________ BRENT -'68 Stepside Project -'98 Z71 Daily Driver -Enough extra parts to build another truck and a half

05-26-2011, 05:28 PM	#22
HeloCrewChief Senior Member Join Date: Aug 2010 Location: North Alabama Posts: 1,033	Re: looking for 67-72 gmc long bed stepside !!! I think it could be had for around $900. The guy didn't seem to firm on price. You wont find a running C10 for much cheaper than that. It is definately going to need alot of work to be a nice truck though. It is a 3 speed on the column and it was originally a I6 truck. I think the guy said it has a 350 in there now. __________________ 1970 C10 to K20 conversion 1974 GMC Jimmy 1968 50th Anniversary Short Bed 1968 Chevelle 1964 Comet Caliente 1990 W250 Cummins

06-06-2011, 02:52 PM	#23
bbrock Registered User Join Date: Jan 2008 Location: north hollywood,ca Posts: 1	Re: looking for 67-72 gmc long bed stepside !!! Here is one on craigslist http://losangeles.craigslist.org/sfv...423281391.html

02-13-2012, 06:24 PM	#24
Ryan5O Registered User Join Date: Mar 2011 Location: Spokane WA Posts: 198	Re: looking for 67-72 gmc long bed stepside !!! Ran across this today... http://wenatchee.craigslist.org/cto/2849328854.html __________________ USCG "Support Search & Rescue, Get Lost"

01-06-2013, 01:09 PM	#25
K20chevy Registered User Join Date: Oct 2012 Location: Pittsfield, ME Posts: 477	Re: looking for 67-72 gmc long bed stepside !!! Ok, now I´m asking for Help myself.... I am also looking for a long bed stepside, BUT GMC would be prefered over Chevy and to make it even harder, I want a K2500, so 3/4ton 4x4 with the spare tire mount on the drivers side and a manual tranny. I know that is about as impossible to find as it gets, but in the north east, everything is rusted out... So if anyone has a truck like that or sees one PLEASE let me know! I would even spend some serious cash on one if I would find one!!! Thanks guys! __________________ 78 Chevy K20 Custom Deluxe, build: http://67-72chevytrucks.com/vboard/s...d.php?t=612104 68 Chevy K20 Panel truck, build: http://67-72chevytrucks.com/vboard/s...41#post7263441

Register or Log In To remove these advertisements.