MD WTB brushed finished piece for console - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**bcnya2** · 07-12-2013, 09:32 PM

Hi, I'm restoring my console and need the piece of brushed aluminum that goes on top of console. My console has the slots for the seat belts and the ashtray (no cups).
Looking for a new one. I will gift with PayPal.

Thanks,
Greg
Posted via Mobile Device

**72ironmike** · 07-12-2013, 09:40 PM

Somebody was repopping these doing a very good job even pressing the indents but I cant remember who ?

**29od1** · 07-12-2013, 09:59 PM

Classic Parts in KC sells them.
http://www.classicparts.com/1969-75-.../#.UeC0q3y9KSM

**bcnya2** · 07-12-2013, 10:09 PM

29od1......thanks for the reply, but your link was for the trim ring. I need the piece that goes on the front side on the console.....it goes in place, then you insert the ashtray over it. I'm not sure what the technical name is......I've seen them in brushed finished, and a chrome finish.

Also, I have a tech question.....when restoring the console, do you paint the pockets where the seatbelts go the same color as the console color (red), or do always paint them suppose black?

Thanks again,
Greg
Posted via Mobile Device

PT'S 70 CST · 07-12-2013, 10:25 PM

I have some $27.50 shipped
http://67-72chevytrucks.com/vboard/s...Y+BEZEL&page=3

PT

**72ironmike** · 07-12-2013, 10:36 PM

PT'S got it. I'll take one after Bcnya decides.

**bcnya2** · 07-12-2013, 10:42 PM

PT, do you both finishes? I was hoping for a brushed finish.

Thanks
Posted via Mobile Device

PT'S 70 CST · 07-12-2013, 11:21 PM

I ordered these in bulk and they are aftermarket but very well made just like the original ones with the rolled lip and the recessed center for the ashtray. I would say these have more of a chrome look but not quit as shiny. I may have some old plates that I had made years ago that were cut out of 18 gauge stainless but the quality as far as the rolled lips and such these do not have but they would have more of a brushed look.

PT

**bcnya2** · 07-13-2013, 08:22 AM

Pleaae send me your paypal address....and I will gift you some money.

Thanks,
Greg
Posted via Mobile Device

07-12-2013, 09:32 PM	#1
bcnya2 Senior Member Join Date: Oct 2012 Location: New Windsor, Md (Baltimore) Posts: 945	WTB brushed finished piece for console Hi, I'm restoring my console and need the piece of brushed aluminum that goes on top of console. My console has the slots for the seat belts and the ashtray (no cups). Looking for a new one. I will gift with PayPal. Thanks, Greg Posted via Mobile Device __________________ 72 Cheyenne Super 350 Holley EFI/700R4 67 Camaro SS/RS 68 Corvette 427 Tri-power 4-speed convertible 55 Chevy Belair Hardtop

07-12-2013, 09:40 PM	#2
72ironmike Senior Member Join Date: Jan 2004 Location: Olathe KS (Greater Kansas City MO Area) Posts: 2,043	Re: WTB brushed finished piece for console Somebody was repopping these doing a very good job even pressing the indents but I cant remember who ?

07-12-2013, 09:59 PM	#3
29od1 Senior Member Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: WTB brushed finished piece for console Classic Parts in KC sells them. http://www.classicparts.com/1969-75-.../#.UeC0q3y9KSM

07-12-2013, 10:09 PM	#4
bcnya2 Senior Member Join Date: Oct 2012 Location: New Windsor, Md (Baltimore) Posts: 945	Re: WTB brushed finished piece for console 29od1......thanks for the reply, but your link was for the trim ring. I need the piece that goes on the front side on the console.....it goes in place, then you insert the ashtray over it. I'm not sure what the technical name is......I've seen them in brushed finished, and a chrome finish. Also, I have a tech question.....when restoring the console, do you paint the pockets where the seatbelts go the same color as the console color (red), or do always paint them suppose black? Thanks again, Greg Posted via Mobile Device __________________ 72 Cheyenne Super 350 Holley EFI/700R4 67 Camaro SS/RS 68 Corvette 427 Tri-power 4-speed convertible 55 Chevy Belair Hardtop

07-12-2013, 10:25 PM	#5
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: WTB brushed finished piece for console I have some $27.50 shipped http://67-72chevytrucks.com/vboard/s...Y+BEZEL&page=3 PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

07-12-2013, 10:36 PM	#6
72ironmike Senior Member Join Date: Jan 2004 Location: Olathe KS (Greater Kansas City MO Area) Posts: 2,043	Re: WTB brushed finished piece for console PT'S got it. I'll take one after Bcnya decides.

07-12-2013, 10:42 PM	#7
bcnya2 Senior Member Join Date: Oct 2012 Location: New Windsor, Md (Baltimore) Posts: 945	Re: WTB brushed finished piece for console PT, do you both finishes? I was hoping for a brushed finish. Thanks Posted via Mobile Device __________________ 72 Cheyenne Super 350 Holley EFI/700R4 67 Camaro SS/RS 68 Corvette 427 Tri-power 4-speed convertible 55 Chevy Belair Hardtop

07-12-2013, 11:21 PM	#8
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: WTB brushed finished piece for console I ordered these in bulk and they are aftermarket but very well made just like the original ones with the rolled lip and the recessed center for the ashtray. I would say these have more of a chrome look but not quit as shiny. I may have some old plates that I had made years ago that were cut out of 18 gauge stainless but the quality as far as the rolled lips and such these do not have but they would have more of a brushed look. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

07-13-2013, 08:22 AM	#9
bcnya2 Senior Member Join Date: Oct 2012 Location: New Windsor, Md (Baltimore) Posts: 945	Re: WTB brushed finished piece for console Pleaae send me your paypal address....and I will gift you some money. Thanks, Greg Posted via Mobile Device __________________ 72 Cheyenne Super 350 Holley EFI/700R4 67 Camaro SS/RS 68 Corvette 427 Tri-power 4-speed convertible 55 Chevy Belair Hardtop



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.