cab supports??

[68chevy]

ok i have a problem my driver side front fender doesnt line up at all there is a huge gap at the bottom and i cant even get the bolt closest to the door to start im thinking that i could have put the wrong bushing in either the cab or rad support on that side so i am going to buy new ones how good are poly supports?? or are the rubber ones better? also where can i get the poly's?? THANKS

------------------
http://68chevy0.tripod.com/68stepside/
68 Chevy c10 swb stepside 4/7 drop sbc 305 edlebrock performer camp/intake/600cfm ec carb 700r4 tranny 3:07 rear gears 17x8 eagle alloy wheels

Pikeville,Kentucky

[Fast68Chevy]

i had same exact deal with my driver fender on the 71 yesterday, i just cranked down the rad support nuts until they were damned tight and i think i moved the door bottom towards front oa hair or the top towards rear, and i used a tire iron to pry the top of fender forward as i tightened the two top cowl fender bolts, then i stuck the bottom tab bolt in the fender cab flange deal and made it start. have to step back and think of what and how parts wil move if you move them a certain way

[68chevy]

ttt

------------------
http://68chevy0.tripod.com/68stepside/
68 Chevy c10 swb stepside 4/7 drop sbc 305 edlebrock performer camp/intake/600cfm ec carb 700r4 tranny 3:07 rear gears 17x8 eagle alloy wheels

Pikeville,Kentucky