New Trackbar Install - The 1947 - Present Chevrolet & GMC Truck Message Board Network

61_FL_Apache · 12-04-2010, 02:07 PM

This is the ole Tractor Supply Trackbar.

ol_skool_chevy · 12-04-2010, 02:19 PM

If it works without any movment then thats cool...Trac bars are not a difficult thing..

*lakeroadster* · 12-04-2010, 04:32 PM

What keeps the center section from turning?

daverod · 12-04-2010, 05:09 PM

Gravity.

The holes got somthing to do with it.

No it's gravity.

61_FL_Apache · 12-04-2010, 05:35 PM

If you look at the last picture, there is a thin jam nut. I had to modify it a little to be able to spin all the way around if needed.

But it may also be the gravity

You decide.

*lakeroadster* · 12-04-2010, 06:08 PM

So how much $$$ did this set you back? (not including the anti-gravity transducing flux-capacitor)

61_FL_Apache · 12-04-2010, 06:26 PM

$37 plus my free labor.

12-04-2010, 02:07 PM	#1
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,065	New Trackbar Install This is the ole Tractor Supply Trackbar. __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

12-04-2010, 02:19 PM	#2
ol_skool_chevy Registered User Join Date: May 2010 Location: Hillsboro, Oregon 97123 Posts: 1,300	Re: New Trackbar Install If it works without any movment then thats cool...Trac bars are not a difficult thing.. __________________ Measure with a yard stick Mark with Chalk Cut with a torch Built it yourself, don't count on others to to do it for you or with you. It will never get done

12-04-2010, 04:32 PM	#3
lakeroadster Account Suspended Join Date: Sep 2009 Location: High Plains of Colorado Posts: 2,485	Re: New Trackbar Install What keeps the center section from turning?

12-04-2010, 05:09 PM	#4
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: New Trackbar Install Gravity. The holes got somthing to do with it. No it's gravity. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

12-04-2010, 05:35 PM	#5
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,065	Re: New Trackbar Install If you look at the last picture, there is a thin jam nut. I had to modify it a little to be able to spin all the way around if needed. But it may also be the gravity You decide. __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

12-04-2010, 06:08 PM	#6
lakeroadster Account Suspended Join Date: Sep 2009 Location: High Plains of Colorado Posts: 2,485	Re: New Trackbar Install So how much $$$ did this set you back? (not including the anti-gravity transducing flux-capacitor) Last edited by lakeroadster; 12-04-2010 at 06:09 PM.

12-04-2010, 06:26 PM	#7
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,065	Re: New Trackbar Install $37 plus my free labor. __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 1961 Apache 10 (sold) 1965 C10 Stepper (sold)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.