Got hose? Ls swap lower rad hose - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Daaaanz67 · 08-29-2012, 11:56 PM

Hi everyone just completed my ls swap on

my 69c10. I'm using the stock three core radiator. It has the neck that comes off and angles up at a 45degrees just like the four cores I compared it to. The aluminum adapter is by jags that run. This hose fit like a glove. I also think that since these hoses have enough strait sections after the bends that even if your motor was set back towards the fire wall it will still work.I just wanted to give back to the swappers community as they have provided me with great information. I know there are many options on what people have used, this is what I did. I was lucky to have free rein in the napa/riebies rad hose section and this is what I used. In the first picture I used the adapter on the right

if you carefully measure and cut these hoses the left over pieces are enough for a second.

used this protective cover to clean everything up this came on the hoses I purchased.
Posted via Mobile Device

Daaaanz67 · 10-12-2012, 05:29 PM

Ttt
Posted via Mobile Device

mcmlxix · 10-13-2012, 06:24 AM

http://www.jagsthatrun.com/Pages/Par...eSplicers.html

Daaaanz67 · 10-13-2012, 08:16 PM

That's where I got mine their service was quite interesting though.
Posted via Mobile Device

solidaxel · 01-25-2013, 11:14 AM

So is that the one I need to order for the steam pipe in the upper hose?

Daaaanz67 · 01-25-2013, 07:23 PM

Yes if you choose that route. I just tapped the top of water pump and ran the hose to that.
Posted via Mobile Device

68fixeruper · 02-02-2013, 08:10 AM

Gates 20931 lower hose

I found this number from another member. Fits right on 3 or 4 core radiator to ls water pump.
Posted via Mobile Device

19seventeeCustom · 02-02-2013, 08:46 PM

i used a 1" galvanized pipe with a brass nipple, and spliced the upper radiator hose, works great and is hidden nicely under the the cold air intake..

Nohatch · 02-03-2013, 10:30 AM

Thanks a lot 68fixeruper very good info. Do you know of an upper rad hose thats out there that works well on our trucks?

**Hart_Rod** · 02-03-2013, 10:35 AM

Great info on the hose and adapters!
Posted via Mobile Device

68fixeruper · 02-03-2013, 11:20 AM

Quote:

Originally Posted by Nohatch

Thanks a lot 68fixeruper very good info. Do you know of an upper rad hose thats out there that works well on our trucks?

The upper some people are modifying a 02 silverado upper hose with jtr fittings or man handling the hose to fit on the upper radiator outlet. Another option is what 19seventeecustom is doing
Posted via Mobile Device

solidaxel · 02-03-2013, 03:21 PM

Quote:

Originally Posted by 19seventeeCustom

i used a 1" galvanized pipe with a brass nipple, and spliced the upper radiator hose, works great and is hidden nicely under the the cold air intake..

A picture would be nice !

Daaaanz67 · 02-03-2013, 11:38 PM

Nohatch I use 06 Tahoe stretch it over the stock three core rad works perfect

Posted via Mobile Device

08-29-2012, 11:56 PM	#1
Daaaanz67 Registered User Join Date: Nov 2011 Location: Idaho Posts: 857	Got hose? Ls swap lower rad hose Hi everyone just completed my ls swap on my 69c10. I'm using the stock three core radiator. It has the neck that comes off and angles up at a 45degrees just like the four cores I compared it to. The aluminum adapter is by jags that run. This hose fit like a glove. I also think that since these hoses have enough strait sections after the bends that even if your motor was set back towards the fire wall it will still work.I just wanted to give back to the swappers community as they have provided me with great information. I know there are many options on what people have used, this is what I did. I was lucky to have free rein in the napa/riebies rad hose section and this is what I used. In the first picture I used the adapter on the rightif you carefully measure and cut these hoses the left over pieces are enough for a second.used this protective cover to clean everything up this came on the hoses I purchased. Posted via Mobile Device

10-12-2012, 05:29 PM	#2
Daaaanz67 Registered User Join Date: Nov 2011 Location: Idaho Posts: 857	Re: Got hose? Ls swap lower rad hose Ttt Posted via Mobile Device

10-13-2012, 06:24 AM	#3
mcmlxix Collector of Projects Join Date: Apr 2003 Location: Las Vegas Posts: 3,106	Re: Got hose? Ls swap lower rad hose http://www.jagsthatrun.com/Pages/Par...eSplicers.html __________________ Rich 1972 K5 Blazer CST Click HERE D60 BIG BRAKE UPGRADE Click HERE

10-13-2012, 08:16 PM	#4
Daaaanz67 Registered User Join Date: Nov 2011 Location: Idaho Posts: 857	Re: Got hose? Ls swap lower rad hose That's where I got mine their service was quite interesting though. Posted via Mobile Device

01-25-2013, 11:14 AM	#5
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: Got hose? Ls swap lower rad hose So is that the one I need to order for the steam pipe in the upper hose? __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42

01-25-2013, 07:23 PM	#6
Daaaanz67 Registered User Join Date: Nov 2011 Location: Idaho Posts: 857	Re: Got hose? Ls swap lower rad hose Yes if you choose that route. I just tapped the top of water pump and ran the hose to that. Posted via Mobile Device

02-02-2013, 08:10 AM	#7
68fixeruper Registered User Join Date: Apr 2006 Location: Amarillo, Tx Posts: 267	Re: Got hose? Ls swap lower rad hose Gates 20931 lower hose I found this number from another member. Fits right on 3 or 4 core radiator to ls water pump. Posted via Mobile Device

02-02-2013, 08:46 PM	#8
19seventeeCustom Registered User Join Date: Mar 2010 Location: Downtown Posts: 573	Re: Got hose? Ls swap lower rad hose i used a 1" galvanized pipe with a brass nipple, and spliced the upper radiator hose, works great and is hidden nicely under the the cold air intake..

02-03-2013, 10:30 AM	#9
Nohatch Registered User Join Date: Jul 2006 Location: Ohio Posts: 83	Re: Got hose? Ls swap lower rad hose Thanks a lot 68fixeruper very good info. Do you know of an upper rad hose thats out there that works well on our trucks?

02-03-2013, 10:35 AM	#10
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,835	Re: Got hose? Ls swap lower rad hose Great info on the hose and adapters! Posted via Mobile Device __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

02-03-2013, 11:38 PM	#13
Daaaanz67 Registered User Join Date: Nov 2011 Location: Idaho Posts: 857	Re: Got hose? Ls swap lower rad hose Nohatch I use 06 Tahoe stretch it over the stock three core rad works perfect Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.