MI Motor mount perches - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Mathew21** · 07-06-2015, 05:54 PM

Sold Thnaks

Motor mount perches from what I understand they will fit I6 except 292 or SBC V8's. These came off of a 1965.

$25.00 Shipped in the lower 48.

evan396 · 07-06-2015, 08:46 PM

We would be interested in these if you or someone else could tell us if they will work in our 66 k20. We took out the six cylinder and are going to replace it with a sbc 350. Thanks evan

**Captainfab** · 07-06-2015, 11:00 PM

These are for a C series truck. The K series trucks use a totally different engine mount bracket. If you are having trouble finding original '60-'66 K series engine mount brackets, you can use the engine mount crossmember from a '67-'72 K series. Just drill the holes and bolt it in. If the I6 you removed is a 230/250, you do not need to change anything.

Quote:

Originally Posted by evan396

We would be interested in these if you or someone else could tell us if they will work in our 66 k20. We took out the six cylinder and are going to replace it with a sbc 350. Thanks evan

**Mathew21** · 07-06-2015, 11:13 PM

Quote:

Originally Posted by evan396

We would be interested in these if you or someone else could tell us if they will work in our 66 k20. We took out the six cylinder and are going to replace it with a sbc 350. Thanks evan

The Captain summed it up well.

Here's a good link about perches for our trucks
http://www.persh.org/pickup/perches.htm

**Mathew21** · 01-26-2016, 11:06 PM

ttt

bcontractor · 01-27-2016, 07:29 PM

I will take them !! Sold !!

07-06-2015, 05:54 PM	#1
Mathew21 Senior Member Join Date: May 2010 Location: Clinton township, MI Posts: 1,191	Sold Motor mount perches Sold Thnaks Motor mount perches from what I understand they will fit I6 except 292 or SBC V8's. These came off of a 1965. $25.00 Shipped in the lower 48. __________________ It only has original paint once Last edited by Mathew21; 01-27-2016 at 09:59 PM.

07-06-2015, 08:46 PM	#2
evan396 Registered User Join Date: Dec 2013 Location: clinton ct Posts: 212	Re: Motor mount perches We would be interested in these if you or someone else could tell us if they will work in our 66 k20. We took out the six cylinder and are going to replace it with a sbc 350. Thanks evan

01-26-2016, 11:06 PM	#5
Mathew21 Senior Member Join Date: May 2010 Location: Clinton township, MI Posts: 1,191	Re: Motor mount perches ttt __________________ It only has original paint once

01-27-2016, 07:29 PM	#6
bcontractor Registered User Join Date: Sep 2014 Location: santa rosa,california Posts: 65	Re: Motor mount perches I will take them !! Sold !! __________________ There is more then one way to do it right !



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.