AZ 4 sets of cab corner moldings. More to come - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1774btcrew** · 04-09-2014, 02:22 PM

In going through my parts I have realized I have a surplus of these cab corners. None of these are perfect but good for drivers. There are minor dings and scratches. I will try my best to describe each set. Price is $45 each pair of 81-87 style not including shipping.
1)Chevy 81-87. These look nice and shine well. Left side had minor dings and scratches, right side has no dings with some scratches. Both could use repainted to look really nice.
2)Chevy 81-87. These shine well. Both sides have some scratches. Right side has a ding. It also has a rubbed spot on the bowtie emblem. Both could use to be repainted to be really nice
3)Camper Special 81-87. These shine well with no major scratches. Left side was factory stamped deep and it put a small hole in it. I didn't even notice this when I purchased these. Right side looks nice. To look really good both sides should be polished and repainted. Still great for a driver.
4)Camper Special 81-87. The finish is DULL on these! The left side has no dents or dings and no noticeable scratches. Right side has a ding by the lower corner. I have shown this in the last picture. Paint looks good.

Set 1

**1774btcrew** · 04-09-2014, 02:25 PM

Set 2

**1774btcrew** · 04-09-2014, 02:26 PM

Set 3

**1774btcrew** · 04-09-2014, 02:29 PM

Set 4

**1774btcrew** · 04-22-2014, 12:02 PM

ttt

*cleansquare* · 04-22-2014, 10:36 PM

I have a good set of camper specials....but would you happen to have an extra long piece that connects the two with no dings?

**1774btcrew** · 06-11-2014, 12:47 AM

Ttt

**1774btcrew** · 10-14-2014, 11:35 PM

ttt

**1774btcrew** · 02-11-2015, 01:24 AM

ttt

**1774btcrew** · 04-01-2015, 09:15 AM

ttt

03vorteczr2 · 04-08-2015, 10:04 PM

Any gmc ones?

**1774btcrew** · 04-08-2015, 10:44 PM

Sorry i only have Chevy and camper special ones.

03vorteczr2 · 04-09-2015, 09:22 AM

Okay thanks for letting me know.

**1774btcrew** · 02-21-2016, 03:38 PM

ttt, I forgot I had these!

345HP87SSAC · 03-03-2016, 01:36 PM

Did set 3 or 4 sell? Price?

**1774btcrew** · 03-04-2016, 01:19 AM

Any of the sets are $45 and all are still available.

**1774btcrew** · 11-21-2016, 11:29 PM

ttt

bbbc10 · 11-22-2016, 07:05 AM

Would u make a package deal on the first 3 sets?

**1774btcrew** · 11-22-2016, 09:55 PM

I will look them over again when I get to the shop tomorrow and make sure they are still in the same condition(I have had them for a while) You can PM me what you had in mind but I won't come down a whole bunch.

obijuan · 11-23-2016, 11:48 AM

Do you have the band to go with a set? All the hardware to attach em to a non equipped truck?

**1774btcrew** · 02-17-2017, 03:25 PM

All 4 sets are still available!

04-09-2014, 02:22 PM	#1
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	4 sets of cab corner moldings. More to come In going through my parts I have realized I have a surplus of these cab corners. None of these are perfect but good for drivers. There are minor dings and scratches. I will try my best to describe each set. Price is $45 each pair of 81-87 style not including shipping. 1)Chevy 81-87. These look nice and shine well. Left side had minor dings and scratches, right side has no dings with some scratches. Both could use repainted to look really nice. 2)Chevy 81-87. These shine well. Both sides have some scratches. Right side has a ding. It also has a rubbed spot on the bowtie emblem. Both could use to be repainted to be really nice 3)Camper Special 81-87. These shine well with no major scratches. Left side was factory stamped deep and it put a small hole in it. I didn't even notice this when I purchased these. Right side looks nice. To look really good both sides should be polished and repainted. Still great for a driver. 4)Camper Special 81-87. The finish is DULL on these! The left side has no dents or dings and no noticeable scratches. Right side has a ding by the lower corner. I have shown this in the last picture. Paint looks good. Set 1 __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck. Last edited by 1774btcrew; 04-09-2014 at 02:31 PM.

04-09-2014, 02:25 PM	#2
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: 4 sets of cab corner moldings. More to come Set 2 __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

04-09-2014, 02:26 PM	#3
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: 4 sets of cab corner moldings. More to come Set 3 __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck. Last edited by 1774btcrew; 04-09-2014 at 02:33 PM.

04-09-2014, 02:29 PM	#4
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: 4 sets of cab corner moldings. More to come Set 4 __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

04-22-2014, 12:02 PM	#5
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: 4 sets of cab corner moldings. More to come ttt __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

04-22-2014, 10:36 PM	#6
cleansquare Account Suspended Join Date: Mar 2013 Location: lumberton tx Posts: 575	Re: 4 sets of cab corner moldings. More to come I have a good set of camper specials....but would you happen to have an extra long piece that connects the two with no dings?

06-11-2014, 12:47 AM	#7
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: 4 sets of cab corner moldings. More to come Ttt __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

10-14-2014, 11:35 PM	#8
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: 4 sets of cab corner moldings. More to come ttt __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

02-11-2015, 01:24 AM	#9
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: 4 sets of cab corner moldings. More to come ttt __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

04-01-2015, 09:15 AM	#10
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: 4 sets of cab corner moldings. More to come ttt __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

04-08-2015, 10:04 PM	#11
03vorteczr2 Registered User Join Date: Jan 2011 Location: New Mexico Posts: 23	Re: 4 sets of cab corner moldings. More to come Any gmc ones?

04-08-2015, 10:44 PM	#12
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: 4 sets of cab corner moldings. More to come Sorry i only have Chevy and camper special ones. __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

04-09-2015, 09:22 AM	#13
03vorteczr2 Registered User Join Date: Jan 2011 Location: New Mexico Posts: 23	Re: 4 sets of cab corner moldings. More to come Okay thanks for letting me know.

02-21-2016, 03:38 PM	#14
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: 4 sets of cab corner moldings. More to come ttt, I forgot I had these! __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

03-03-2016, 01:36 PM	#15
345HP87SSAC Registered User Join Date: Jul 2010 Location: Stanberry, Missouri Posts: 223	Re: 4 sets of cab corner moldings. More to come Did set 3 or 4 sell? Price?



Register or Log In To remove these advertisements.

03-04-2016, 01:19 AM	#16
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: 4 sets of cab corner moldings. More to come Any of the sets are $45 and all are still available. __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

11-21-2016, 11:29 PM	#17
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: 4 sets of cab corner moldings. More to come ttt __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

11-22-2016, 07:05 AM	#18
bbbc10 Diggin The SquareLife Join Date: Dec 2010 Location: garland,tx Posts: 1,933	Re: 4 sets of cab corner moldings. More to come Would u make a package deal on the first 3 sets?

11-22-2016, 09:55 PM	#19
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: 4 sets of cab corner moldings. More to come I will look them over again when I get to the shop tomorrow and make sure they are still in the same condition(I have had them for a while) You can PM me what you had in mind but I won't come down a whole bunch. __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

11-23-2016, 11:48 AM	#20
obijuan Registered User Join Date: Jun 2012 Location: cibolo tx Posts: 1,033	Re: 4 sets of cab corner moldings. More to come Do you have the band to go with a set? All the hardware to attach em to a non equipped truck?

02-17-2017, 03:25 PM	#21
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: 4 sets of cab corner moldings. More to come All 4 sets are still available! __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

Register or Log In To remove these advertisements.