bagged c10 headers exhaust questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

steeeeeve · 11-04-2020, 04:42 PM

Now that I have a fresh 350 and a fresh 700r4, it's time to do the exhaust.
I changed the front crossmember to one that would let the tucked exhaust clear, now i have to decide what headers to get.
I can't find a shop in Austin Tx that will just do the whole thing. They want me to supply the headers and rear crossmember.

Do you guys like the short headers that just point straight down or the type that swoop back?

Any troubles hitting the 700r4 shift linkage?

suggestions on which headers (to hang the exhaust high) to order is much appreciated. Not looking to go cheap or break the bank. This is just a weekend driver.

thinking of this-

https://www.jegs.com/i/JEGS/555/3005...3L+%2F+327+%29

or

https://www.ebay.com/itm/Truck-Heade...8AAOSwCRVfZEq8

thanks
steve
1968c10
350
700r4
bagged

**70STOVEBOLT** · 11-05-2020, 04:55 PM

Can't speak to small blocks, but I used Chevelle Hedders on my big block. I did have to modify the shift linkage on the TH400 and get a tubular trans crossmember, but it tucks up nicely. I used a Pypes stainless kit and modified it to fit.

steeeeeve · 11-05-2020, 06:21 PM

https://www.summitracing.com/parts/hed-69010

ordered these hedmans and going to hopefully make them work.

SCOTI · 11-06-2020, 02:12 PM

With any header, there might be tweeks to the shift linkage required. Those 3/4 length headers should work well for your exhaust placement needs & keep things above the lip on the bottom of the frame rail.

11-04-2020, 04:42 PM	#1
steeeeeve Registered User Join Date: Nov 2018 Location: austin Texas Posts: 37	bagged c10 headers exhaust questions Now that I have a fresh 350 and a fresh 700r4, it's time to do the exhaust. I changed the front crossmember to one that would let the tucked exhaust clear, now i have to decide what headers to get. I can't find a shop in Austin Tx that will just do the whole thing. They want me to supply the headers and rear crossmember. Do you guys like the short headers that just point straight down or the type that swoop back? Any troubles hitting the 700r4 shift linkage? suggestions on which headers (to hang the exhaust high) to order is much appreciated. Not looking to go cheap or break the bank. This is just a weekend driver. thinking of this- https://www.jegs.com/i/JEGS/555/3005...3L+%2F+327+%29 or https://www.ebay.com/itm/Truck-Heade...8AAOSwCRVfZEq8 thanks steve 1968c10 350 700r4 bagged Last edited by steeeeeve; 11-04-2020 at 05:14 PM.

11-05-2020, 04:55 PM	#2
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,241	Re: bagged c10 headers exhaust questions Can't speak to small blocks, but I used Chevelle Hedders on my big block. I did have to modify the shift linkage on the TH400 and get a tubular trans crossmember, but it tucks up nicely. I used a Pypes stainless kit and modified it to fit. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

11-05-2020, 06:21 PM	#3
steeeeeve Registered User Join Date: Nov 2018 Location: austin Texas Posts: 37	Re: bagged c10 headers exhaust questions https://www.summitracing.com/parts/hed-69010 ordered these hedmans and going to hopefully make them work.

11-06-2020, 02:12 PM	#4
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,926	Re: bagged c10 headers exhaust questions With any header, there might be tweeks to the shift linkage required. Those 3/4 length headers should work well for your exhaust placement needs & keep things above the lip on the bottom of the frame rail. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.