Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
04-02-2022, 08:05 AM | #1 |
Registered User
Join Date: Sep 2020
Location: Cleveland, Ohio
Posts: 485
|
Wiring on Flaming River column
I took all the wiring from the original column and got it wired to the Flaming River column. The directions were pretty straight forward. They left one wire off the list. There is a long gray wire that is separate from the wiring plug on the Flaming River column. They make no mention what this wire is for and my original column did not have it.
Anybody know what this is for? |
04-02-2022, 09:12 AM | #2 |
Senior Member
Join Date: Jun 2007
Location: Pine Ridge Florida
Posts: 4,120
|
Re: Wiring on Flaming River column
The directional switches are different on a non-tilt column to a tilt column. The gray wire is for the bulb that illuminates the gearshift indicator.
__________________
Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205 |
04-02-2022, 09:22 AM | #3 |
Registered User
Join Date: Sep 2020
Location: Cleveland, Ohio
Posts: 485
|
Re: Wiring on Flaming River column
The truck originally had a non-tilt, I put in a tilt, then I needed a shorter column, so I went with the FR.
Thanks for the gray wire info! |
Bookmarks |
|
|