TX New Repair piece for lower right hand side of radiator support - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**CS1972** · 09-25-2022, 10:51 PM

Made by Member “Clatterville trolley”, see: https://67-72chevytrucks.com/vboard/...d.php?t=817982

[B]I never used mine, was $75.00 shipped CONUS (no PO boxes). $50.00! ..... SOLD

“I have been making these for folks that I sell parts to for some time and thought I might offer a couple to the folks on here.

I hand form these and they come with the weld in nuts and factory OEM bolts.

They are made out of 16 gauge steel - I checked the thickness of the steel in the radiator support with a gauge and they appear to be about 17 gauge, so these are a little thicker than stock.

I constructed them to be long enough to reach under the upright where the rust normally stops unless it is really baaaadddd!

I leave the weld nuts loose so that it allows slight adjustment to line up with the holes in the inner fender front - once you get them where you want them it is easy enough to spot them in.

Right now I only have two made up so that is all I am selling for the moment - not trying to turn this into a business.

Price $75 shipped to you.

First photo shows the replacement piece next to a rusted up one that I removed to replace with new.

Last photo shows where the new repair piece goes on a radiator support.

Works for 67-72 C10 / K10's”

**CS1972** · 01-12-2023, 10:09 AM

Well, a few months later and I still have it...........price reduced!

**mikeEboy** · 01-21-2023, 12:43 PM

I'm interested. What is the new price?

**Utahboy** · 01-22-2023, 07:54 PM

I’ll take it.

**CS1972** · 01-26-2023, 02:01 PM

Utahboy,

Sorry for the delay in response, since selling my truck I only check in every couple of days.

Paypal = norlegne@yahoo.com

I received your PM & responded. Send me your address and I'll get it right out.

**CS1972** · 01-26-2023, 02:05 PM

Opps.............tried to respond, but received this message: "mikeEboy has exceeded their stored private messages quota and cannot accept further messages until they clear some space"

**Utahboy** · 01-26-2023, 06:57 PM

Payment sent. Sending my address via PM. Thanks

**CS1972** · 01-26-2023, 10:18 PM

Payment received, boxed and UPS tracking sent Via PM. Will drop off tomorrow.

09-25-2022, 10:51 PM	#1
CS1972 Senior Member Join Date: Jun 2018 Location: Austin Texas Posts: 449	New Repair piece for lower right hand side of radiator support Made by Member “Clatterville trolley”, see: https://67-72chevytrucks.com/vboard/...d.php?t=817982 [B]I never used mine, was $75.00 shipped CONUS (no PO boxes). $50.00! ..... SOLD “I have been making these for folks that I sell parts to for some time and thought I might offer a couple to the folks on here. I hand form these and they come with the weld in nuts and factory OEM bolts. They are made out of 16 gauge steel - I checked the thickness of the steel in the radiator support with a gauge and they appear to be about 17 gauge, so these are a little thicker than stock. I constructed them to be long enough to reach under the upright where the rust normally stops unless it is really baaaadddd! I leave the weld nuts loose so that it allows slight adjustment to line up with the holes in the inner fender front - once you get them where you want them it is easy enough to spot them in. Right now I only have two made up so that is all I am selling for the moment - not trying to turn this into a business. Price $75 shipped to you. First photo shows the replacement piece next to a rusted up one that I removed to replace with new. Last photo shows where the new repair piece goes on a radiator support. Works for 67-72 C10 / K10's” Attached Images __________________ Ron 1972 Cheyenne Super 1/2 ton LWB 4x4 - Grapefruit Yellow / White Last edited by CS1972; 01-26-2023 at 10:20 PM. Reason: Sold

01-12-2023, 10:09 AM	#2
CS1972 Senior Member Join Date: Jun 2018 Location: Austin Texas Posts: 449	Re: New Repair piece for lower right hand side of radiator support Well, a few months later and I still have it...........price reduced! __________________ Ron 1972 Cheyenne Super 1/2 ton LWB 4x4 - Grapefruit Yellow / White

01-21-2023, 12:43 PM	#3
mikeEboy Junior Member Join Date: May 2022 Location: West Newton, MA Posts: 32	Re: New Repair piece for lower right hand side of radiator support I'm interested. What is the new price?

01-22-2023, 07:54 PM	#4
Utahboy Senior Member Join Date: May 2014 Location: Linden, Michigan Posts: 426	Re: New Repair piece for lower right hand side of radiator support I’ll take it.

01-26-2023, 02:01 PM	#5
CS1972 Senior Member Join Date: Jun 2018 Location: Austin Texas Posts: 449	Re: New Repair piece for lower right hand side of radiator support Utahboy, Sorry for the delay in response, since selling my truck I only check in every couple of days. Paypal = norlegne@yahoo.com I received your PM & responded. Send me your address and I'll get it right out. __________________ Ron 1972 Cheyenne Super 1/2 ton LWB 4x4 - Grapefruit Yellow / White

01-26-2023, 02:05 PM	#6
CS1972 Senior Member Join Date: Jun 2018 Location: Austin Texas Posts: 449	Re: New Repair piece for lower right hand side of radiator support Opps.............tried to respond, but received this message: "mikeEboy has exceeded their stored private messages quota and cannot accept further messages until they clear some space" __________________ Ron 1972 Cheyenne Super 1/2 ton LWB 4x4 - Grapefruit Yellow / White

01-26-2023, 06:57 PM	#7
Utahboy Senior Member Join Date: May 2014 Location: Linden, Michigan Posts: 426	Re: New Repair piece for lower right hand side of radiator support Payment sent. Sending my address via PM. Thanks

01-26-2023, 10:18 PM	#8
CS1972 Senior Member Join Date: Jun 2018 Location: Austin Texas Posts: 449	Re: New Repair piece for lower right hand side of radiator support Payment received, boxed and UPS tracking sent Via PM. Will drop off tomorrow. __________________ Ron 1972 Cheyenne Super 1/2 ton LWB 4x4 - Grapefruit Yellow / White



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.