TX WTB: Stepside Tailgate - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**72K20** · 01-26-2010, 03:32 PM

Doesn't have to be super perfect, just going on a future nice driver, not show quality. Need the latches/chains/etc too if you got 'em. Prefer DFW area to keep the shipping or driving to a minimum.

Conroe trucker · 01-26-2010, 10:42 PM

I have one for trade.
I need pulleys, crank and WP for an AC truck.
No chains at this time, might have them later.

**72K20** · 01-27-2010, 09:43 AM

I would sure trade if I had any of those!

Conroe trucker · 01-27-2010, 01:01 PM

I will let it go for $ 50.00 and you can have the step side fenders also.
The bedsides are rusted out but can be repaired.
The fenders have lots of rust that could be bobbed to make a mudder or street truck.

The tailgate has surface rust that could be blasted off or left as is until you do something else.

I can send photos to your email, they are 4-5MB each.

**72K20** · 01-27-2010, 01:25 PM

I am interested. PM sent with e-mail info.

01-26-2010, 03:32 PM	#1
72K20 Slow Old Timer Join Date: Apr 2000 Location: Decatur, Texas USA Posts: 224	WTB: Stepside Tailgate Doesn't have to be super perfect, just going on a future nice driver, not show quality. Need the latches/chains/etc too if you got 'em. Prefer DFW area to keep the shipping or driving to a minimum.

01-26-2010, 10:42 PM	#2
Conroe trucker SWBs: 67 2x4, 67 4x4, 70 4x4 Join Date: Nov 2007 Location: Conroe, TX Posts: 483	Re: WTB: Stepside Tailgate I have one for trade. I need pulleys, crank and WP for an AC truck. No chains at this time, might have them later. __________________ FINISHED Project thread: 67 SWB 4x4 FINISHED Project thread: 67 SWB 6 cyl cruiser Project thread: Road Toad 70 SWB Step, 4x4, 292, 3OT 01 C5 convertable 08 Z06

01-27-2010, 09:43 AM	#3
72K20 Slow Old Timer Join Date: Apr 2000 Location: Decatur, Texas USA Posts: 224	Re: WTB: Stepside Tailgate I would sure trade if I had any of those!

01-27-2010, 01:01 PM	#4
Conroe trucker SWBs: 67 2x4, 67 4x4, 70 4x4 Join Date: Nov 2007 Location: Conroe, TX Posts: 483	Re: WTB: Stepside Tailgate I will let it go for $ 50.00 and you can have the step side fenders also. The bedsides are rusted out but can be repaired. The fenders have lots of rust that could be bobbed to make a mudder or street truck. The tailgate has surface rust that could be blasted off or left as is until you do something else. I can send photos to your email, they are 4-5MB each. __________________ FINISHED Project thread: 67 SWB 4x4 FINISHED Project thread: 67 SWB 6 cyl cruiser Project thread: Road Toad 70 SWB Step, 4x4, 292, 3OT 01 C5 convertable 08 Z06

01-27-2010, 01:25 PM	#5
72K20 Slow Old Timer Join Date: Apr 2000 Location: Decatur, Texas USA Posts: 224	Re: WTB: Stepside Tailgate I am interested. PM sent with e-mail info.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.