Vent wing assemblies and window regulator. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

grs · 04-30-2011, 09:35 PM

What year vent wing assemblies will fit in my 1987 with no problem? And what year window regulator will work? Thanks

**old Rusty C10** · 04-30-2011, 10:06 PM

i believe 81-87 will be exact fit for the window regulators as 73-80 had a different size or depth crank on them.. the vent windows are the same from 73-81 except for the lock assemblies IIRC

grs · 05-01-2011, 09:33 AM

Thanks Bob. I can get two vent windows, and one window regulator from a yard in Arizona for $180.00. Do you think that is a good price?

Restrorob · 05-01-2011, 10:19 AM

That's crazy high for my part of the country on used parts, Those items are small enough to ship so I'd look around more.....

lilpoindexter · 05-01-2011, 01:18 PM

Quote:

Originally Posted by grs

Thanks Bob. I can get two vent windows, and one window regulator from a yard in Arizona for $180.00. Do you think that is a good price?

I redid my door and window rubber, and the driver side vend window pivot was busted, probably due to a break in at some point..The vent window assembly was $22.95, but that's here in socal...these trucks are as common as dirt, so I'd say the price is too high. I think you could even find decent parts in Illinois.

grs · 05-01-2011, 03:35 PM

I will check the yards near Joliet, Il.

04-30-2011, 09:35 PM	#1
grs Registered User Join Date: Jan 2010 Location: Roanoke, Tx. Posts: 1,561	Vent wing assemblies and window regulator. What year vent wing assemblies will fit in my 1987 with no problem? And what year window regulator will work? Thanks

04-30-2011, 10:06 PM	#2
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,276	Re: Vent wing assemblies and window regulator. i believe 81-87 will be exact fit for the window regulators as 73-80 had a different size or depth crank on them.. the vent windows are the same from 73-81 except for the lock assemblies IIRC __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

05-01-2011, 09:33 AM	#3
grs Registered User Join Date: Jan 2010 Location: Roanoke, Tx. Posts: 1,561	Re: Vent wing assemblies and window regulator. Thanks Bob. I can get two vent windows, and one window regulator from a yard in Arizona for $180.00. Do you think that is a good price?

05-01-2011, 10:19 AM	#4
Restrorob The One And Only !!! Join Date: Jan 2007 Location: Hole in the woods Florida Posts: 4,567	Re: Vent wing assemblies and window regulator. That's crazy high for my part of the country on used parts, Those items are small enough to ship so I'd look around more..... __________________ 93 Jeep XJ 88 Buick La Sabra Toys; 88 TA-GTA in the works.... 97 GMC Ext. Cab 502 Crate 5 Spd......Sucks Gas But Haulz Azz ! The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic. *"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!*

05-01-2011, 03:35 PM	#6
grs Registered User Join Date: Jan 2010 Location: Roanoke, Tx. Posts: 1,561	Re: Vent wing assemblies and window regulator. I will check the yards near Joliet, Il.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.