CA Parting 68 Chevy 1/2 ton 2wd - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 05-01-2011, 11:11 AM

I just brought in this truck that I will be making a trailer out of the back end. The grille, hood, and gas pedal assembly are sold. The fenders are bad, the vent windows are rusty, dash is wasted, and right inner fender is rusted. Please respond in thread to avoid confusion. I will give 2 days after I answer a question on a part and then it goes to next in line.
Thanks,
Ray

283 engine- $300 local
3 speed manual trans- $50 local
clutch/brake pedal assembly- $25 plus shipping
clutch rod- $10 plus shipping
z bar- $15 plus shipping
3 on tree column tight shifting- $40 plus shipping
steering wheel driver conditiopn- $25 plus shipping
front outer bumper brackets- $20 plus shipping
radiator support not rusted out, but bent in middle- $40 local
6 lug ralley wheels- $100 plus shipping (4)
fender emblems- $25 shipped pair
door panels driver condition- $30 plus shipping
heater box engine side- $40 plus shipping SOLD
manual choke complete knob to carb bracket, cable looks to be broke about an inch at carb, but I think it will still work- $30 plus shipping PENDING
2bbl air cleaner- $25 plus shipping
spacer- $16 shipped
2bbl carb- $40 shipped
distributor- $25 shipped
alternator brackets early style for untapped heads- $50 shipped
ram horn exhaust with unbroken smog tubes- $100 pair plus shipping
smog pump with brackets- $60 shipped
engine stands- $20 shipped
windshield with wiper scrape- $25 local...Art is first up SOLD
steering wheel SOLD
horn button SOLD

KrazyRay · 05-01-2011, 11:16 AM

pics

KrazyRay · 05-01-2011, 11:22 AM

more

vasquezmrysvll · 05-01-2011, 11:33 AM

ill take the glass. pm sent ray

projectjimmie68 · 05-01-2011, 11:40 AM

How much for glove box door plus shipping to zip 32136?

KrazyRay · 05-01-2011, 12:41 PM

Quote:

Originally Posted by projectjimmie68

How much for glove box door plus shipping to zip 32136?

Its $25 shipped to FL
Thanks,
Ray

hoppyloop · 05-01-2011, 12:32 PM

Hello not sure if iam doing this right do you have a jack would be interested if so
thanks hoppyloop

KrazyRay · 05-01-2011, 12:42 PM

Quote:

Originally Posted by hoppyloop

Hello not sure if iam doing this right do you have a jack would be interested if so
thanks hoppyloop

This truck did not have a jack. I will check my parts stash. $32 shipped if I have one.
Thanks,
Ray

hoppyloop · 05-01-2011, 03:07 PM

Hello if you have a jack i will take it also how about the dome lamp assembly and screws and wire if good i will take also let me know. give me paypal info let me know thanks. I really enjoy all the info on this site and the great guys on here
thanks
tom

hoppyloop · 05-02-2011, 12:05 AM

Hello my zip is 89108 forgot to put it in post for jack and maybe dome lamp

KrazyRay · 05-02-2011, 01:10 AM

Quote:

Originally Posted by hoppyloop

Hello my zip is 89108 forgot to put it in post for jack and maybe dome lamp

I have the dome lamp with wires $15...I can include in same box as jack. $47 shipped for everything.
Thanks,
Ray

hoppyloop · 05-02-2011, 08:47 AM

Iwill take them let me know how to pay for jack and dome assembly
thanks

tooter · 05-02-2011, 11:26 AM

Does steering wheel come with horn button ? Shipped price to 39562. Thanks

hoppyloop · 05-02-2011, 12:56 PM

Thanks PM sent

tac106842 · 05-02-2011, 02:44 PM

I am interested in the front frame from the radiator support brackets to the bumper. What kind of shape are they in and what would you want shipped to 43402? Thanks, Aaron.

KrazyRay · 05-02-2011, 03:20 PM

Quote:

Originally Posted by tac106842

I am interested in the front frame from the radiator support brackets to the bumper. What kind of shape are they in and what would you want shipped to 43402? Thanks, Aaron.

Aaron, They are in good shape. $70 shipped to OH for the pair.
Thanks,
Ray

tac106842 · 05-02-2011, 05:22 PM

I will have to pass, Thanks for getting back with me Ray!

Aaron

sflem61 · 05-02-2011, 09:02 PM

put me in line behind tooter for steering wheel

tampz67@yahoo.com · 05-02-2011, 09:19 PM

Any seat belts?
Posted via Mobile Device

KrazyRay · 05-02-2011, 11:22 PM

Quote:

Originally Posted by tampz67@yahoo.com

Any seat belts?
Posted via Mobile Device

The seat belts are junk.
Thanks,
Ray

Heavy Evy · 05-02-2011, 09:37 PM

any pics of the steering wheel? i need one bad for my burb its about to dry rot off the metal frame.
Posted via Mobile Device
Posted via Mobile Device

clos69 · 05-03-2011, 11:33 AM

Any rips or tears on the door panels?? Do you think they will clean up nice? total shipped to TX,76182, thanks

**70STOVEBOLT** · 05-03-2011, 12:00 PM

Ray, what kind of shape is the under dash wiring harness?

Rich916 · 05-03-2011, 02:33 PM

Ray,
I'll take the heater box (engine side). I will pick it up Saturday May 7th if that works for you.

KrazyRay · 05-03-2011, 07:25 PM

clos69- I will check closely.

70STOVEBOLT- This one is probably bad...I have another 68 cab I can check. If good, it will be $36 shipped for harness with fuse block.

Rich, The heater box is yours. I have a couple of them.
SOLD
Thanks,
ray

05-01-2011, 11:11 AM	#1
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Parting 68 Chevy 1/2 ton 2wd I just brought in this truck that I will be making a trailer out of the back end. The grille, hood, and gas pedal assembly are sold. The fenders are bad, the vent windows are rusty, dash is wasted, and right inner fender is rusted. Please respond in thread to avoid confusion. I will give 2 days after I answer a question on a part and then it goes to next in line. Thanks, Ray 283 engine- $300 local 3 speed manual trans- $50 local clutch/brake pedal assembly- $25 plus shipping clutch rod- $10 plus shipping z bar- $15 plus shipping 3 on tree column tight shifting- $40 plus shipping steering wheel driver conditiopn- $25 plus shipping front outer bumper brackets- $20 plus shipping radiator support not rusted out, but bent in middle- $40 local 6 lug ralley wheels- $100 plus shipping (4) fender emblems- $25 shipped pair door panels driver condition- $30 plus shipping heater box engine side- $40 plus shipping SOLD manual choke complete knob to carb bracket, cable looks to be broke about an inch at carb, but I think it will still work- $30 plus shipping PENDING 2bbl air cleaner- $25 plus shipping spacer- $16 shipped 2bbl carb- $40 shipped distributor- $25 shipped alternator brackets early style for untapped heads- $50 shipped ram horn exhaust with unbroken smog tubes- $100 pair plus shipping smog pump with brackets- $60 shipped engine stands- $20 shipped windshield with wiper scrape- $25 local...Art is first up SOLD steering wheel SOLD horn button SOLD Attached Images Last edited by KrazyRay; 05-12-2011 at 10:24 AM.

05-01-2011, 11:16 AM	#2
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 68 Chevy 1/2 ton 2wd pics Attached Images

05-01-2011, 11:22 AM	#3
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 68 Chevy 1/2 ton 2wd more Attached Images

05-01-2011, 11:33 AM	#4
vasquezmrysvll "the other guy" Join Date: Oct 2008 Location: Olivehurst California 95961 Posts: 901	Re: Parting 68 Chevy 1/2 ton 2wd ill take the glass. pm sent ray __________________ God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE"

05-01-2011, 11:40 AM	#5
projectjimmie68 Registered User Join Date: Oct 2009 Location: Flagler Beach,Fl. Posts: 455	Re: Parting 68 Chevy 1/2 ton 2wd How much for glove box door plus shipping to zip 32136?

05-01-2011, 12:32 PM	#7
hoppyloop Registered User Join Date: Apr 2011 Location: Las Vegas,NV Posts: 6	Re: Parting 68 Chevy 1/2 ton 2wd Hello not sure if iam doing this right do you have a jack would be interested if so thanks hoppyloop

05-01-2011, 03:07 PM	#9
hoppyloop Registered User Join Date: Apr 2011 Location: Las Vegas,NV Posts: 6	Re: Parting 68 Chevy 1/2 ton 2wd Hello if you have a jack i will take it also how about the dome lamp assembly and screws and wire if good i will take also let me know. give me paypal info let me know thanks. I really enjoy all the info on this site and the great guys on here thanks tom

05-02-2011, 12:05 AM	#10
hoppyloop Registered User Join Date: Apr 2011 Location: Las Vegas,NV Posts: 6	Re: Parting 68 Chevy 1/2 ton 2wd Hello my zip is 89108 forgot to put it in post for jack and maybe dome lamp

05-02-2011, 08:47 AM	#12
hoppyloop Registered User Join Date: Apr 2011 Location: Las Vegas,NV Posts: 6	Re: Parting 68 Chevy 1/2 ton 2wd Iwill take them let me know how to pay for jack and dome assembly thanks

05-02-2011, 11:26 AM	#13
tooter Registered User Join Date: Dec 2010 Location: Moss Point , Ms Posts: 1,342	Re: Parting 68 Chevy 1/2 ton 2wd Does steering wheel come with horn button ? Shipped price to 39562. Thanks __________________ My Ole 67 http://67-72chevytrucks.com/vboard/s...d.php?t=505830

05-02-2011, 12:56 PM	#14
hoppyloop Registered User Join Date: Apr 2011 Location: Las Vegas,NV Posts: 6	Re: Parting 68 Chevy 1/2 ton 2wd Thanks PM sent

05-02-2011, 02:44 PM	#15
tac106842 Registered User Join Date: Mar 2010 Location: Van Buren, ohio Posts: 69	Re: Parting 68 Chevy 1/2 ton 2wd I am interested in the front frame from the radiator support brackets to the bumper. What kind of shape are they in and what would you want shipped to 43402? Thanks, Aaron.

05-02-2011, 05:22 PM	#17
tac106842 Registered User Join Date: Mar 2010 Location: Van Buren, ohio Posts: 69	Re: Parting 68 Chevy 1/2 ton 2wd I will have to pass, Thanks for getting back with me Ray! Aaron

05-02-2011, 09:02 PM	#18
sflem61 Registered User Join Date: Dec 2010 Location: columbus,ms Posts: 108	Re: Parting 68 Chevy 1/2 ton 2wd put me in line behind tooter for steering wheel

05-02-2011, 09:19 PM	#19
tampz67@yahoo.com Registered User Join Date: Feb 2011 Location: baytown, tx Posts: 146	Re: Parting 68 Chevy 1/2 ton 2wd Any seat belts? Posted via Mobile Device



Register or Log In To remove these advertisements.

05-02-2011, 09:37 PM	#21
Heavy Evy born to lose Join Date: Sep 2008 Location: Salt Lake City, Utah Posts: 842	Re: Parting 68 Chevy 1/2 ton 2wd any pics of the steering wheel? i need one bad for my burb its about to dry rot off the metal frame. Posted via Mobile Device Posted via Mobile Device __________________ _____________________ '67 Chevy Belair Wagon 283 Powerglide '68 Chevy II Nova 2 door 350 TH400 Sold!! '71 Chevy C20 350 TH350 '71 Chevy C10 Burb 350 TH350 stolen totalled gone.... Burb Build http://67-72chevytrucks.com/vboard/s...d.php?t=475155 Nova Build http://67-72chevytrucks.com/vboard/s...d.php?t=498979 Wagon Build http://67-72chevytrucks.com/vboard/s...d.php?t=543052 Not giving a truck.

05-03-2011, 11:33 AM	#22
clos69 Its Topless Season!!!! Join Date: Jul 2007 Location: fort worth, tx Posts: 1,657	Re: Parting 68 Chevy 1/2 ton 2wd Any rips or tears on the door panels?? Do you think they will clean up nice? total shipped to TX,76182, thanks __________________ -Carlos- The of America *1967 SWB Custom C-10* *(Celeste)* Join the *Patina Club*

05-03-2011, 12:00 PM	#23
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,244	Re: Parting 68 Chevy 1/2 ton 2wd Ray, what kind of shape is the under dash wiring harness? __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

05-03-2011, 02:33 PM	#24
Rich916 Registered User Join Date: Dec 2009 Location: Rancho Cordova, CA Posts: 274	Re: Parting 68 Chevy 1/2 ton 2wd Ray, I'll take the heater box (engine side). I will pick it up Saturday May 7th if that works for you. __________________ 71 Short Step Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=429946

05-03-2011, 07:25 PM	#25
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 68 Chevy 1/2 ton 2wd clos69- I will check closely. 70STOVEBOLT- This one is probably bad...I have another 68 cab I can check. If good, it will be $36 shipped for harness with fuse block. Rich, The heater box is yours. I have a couple of them. SOLD Thanks, ray Last edited by KrazyRay; 05-12-2011 at 10:27 AM.

Register or Log In To remove these advertisements.