The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-16-2011, 04:36 PM   #1
harnalien
TruckincrazY
 
harnalien's Avatar
 
Join Date: May 2004
Location: Haslet, TX
Posts: 493
Fuel system help (fill in the blanks)

I’m trying to put together my fuel system, and this is what I’ve come up with so far. *I have an LQ4 and will be running the older style fuel rails with the return. *I have come up with the following parts for the fuel lines, and was hoping some experienced eyes could let me know if I’m missing anything. *I will try and post a little sketch of what I’m envisioning later when I get home. *Basically, these are the parts for 2 fuel rail fittings, hose ends, and a fuel filter. *Would -6 AN hose work for the entire system, or do I need specific line for the return and feed? *Any tips would be greatly appreciated. Thanks


http://www.summitracing.com/parts/RUS-640853/

http://www.summitracing.com/parts/RUS-640863/

http://www.summitracing.com/parts/RUS-610020/

http://www.summitracing.com/parts/RUS-632090/

http://www.summitracing.com/parts/RUS-650133/
Posted via Mobile Device
__________________
My build thread - '84 2wd w/ a 6.0 swap
http://67-72chevytrucks.com/vboard/s...d.php?t=433595
harnalien is offline   Reply With Quote
Old 03-16-2011, 04:39 PM   #2
67C10BUB
Registered User
 
67C10BUB's Avatar
 
Join Date: Aug 2010
Location: Alta Loma, CA
Posts: 610
Re: Fuel system help (fill in the blanks)

I used the -6 AN lines for supply and return on mine and it works great.
__________________
67 5.3L Build
67C10BUB is offline   Reply With Quote
Old 03-16-2011, 04:45 PM   #3
Clyde65
1965 Chevy C10, 2005 4.8L/4l60
 
Clyde65's Avatar
 
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,540
Re: Fuel system help (fill in the blanks)

I used -6 exclusively, a corvette fuel filter. I think Russell brand from summit is what I used, but they have the Summit brand that is more reasonable than the name brand stuff is.
__________________
Clyde65

Rebuild of Clyde
http://67-72chevytrucks.com/vboard/s...84#post8338184

69 Aristocrat Lo Liner build
http://67-72chevytrucks.com/vboard/s...84#post7561684



support our troops!
Clyde65 is offline   Reply With Quote
Old 03-16-2011, 04:53 PM   #4
harnalien
TruckincrazY
 
harnalien's Avatar
 
Join Date: May 2004
Location: Haslet, TX
Posts: 493
Re: Fuel system help (fill in the blanks)

Ok cool, I think I'll get this stuff. Do the hose ends, rail adapters and filter look like they'll jive with each other? I don't know if I'll need any special fittings where the lines connect to the fuel sender end, or if the hose can just slide on with FI hose clamps.
Posted via Mobile Device
__________________
My build thread - '84 2wd w/ a 6.0 swap
http://67-72chevytrucks.com/vboard/s...d.php?t=433595
harnalien is offline   Reply With Quote
Old 03-16-2011, 05:02 PM   #5
Clyde65
1965 Chevy C10, 2005 4.8L/4l60
 
Clyde65's Avatar
 
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,540
Re: Fuel system help (fill in the blanks)

Yes getting that stuff, you should be all set and if there is LS style hose clamps those should work also.
__________________
Clyde65

Rebuild of Clyde
http://67-72chevytrucks.com/vboard/s...84#post8338184

69 Aristocrat Lo Liner build
http://67-72chevytrucks.com/vboard/s...84#post7561684



support our troops!
Clyde65 is offline   Reply With Quote
Old 03-16-2011, 05:20 PM   #6
usmcchevy
Has more rust than truck...
 
usmcchevy's Avatar
 
Join Date: Apr 2005
Location: Ivanhoe, MN
Posts: 2,421
Re: Fuel system help (fill in the blanks)

Just a FYI, I went with the Summit Teflon SS hose, little cheaper.

http://www.summitracing.com/parts/SUM-220985/
__________________
1972 Custom/10 SWB, 4.8/4l80e
Build thread

LSx Swap FAQ index
usmcchevy is offline   Reply With Quote
Old 03-16-2011, 05:30 PM   #7
harnalien
TruckincrazY
 
harnalien's Avatar
 
Join Date: May 2004
Location: Haslet, TX
Posts: 493
Re: Fuel system help (fill in the blanks)

Quote:
Originally Posted by usmcchevy View Post
Just a FYI, I went with the Summit Teflon SS hose, little cheaper.

http://www.summitracing.com/parts/SUM-220985/
That is a bit cheaper. The place I'm getting it from has free shipping and handling, plus I have a coupon, so the price will be about the same. I'll get this stuff ordered when I get home.
Posted via Mobile Device
__________________
My build thread - '84 2wd w/ a 6.0 swap
http://67-72chevytrucks.com/vboard/s...d.php?t=433595
harnalien is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:52 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com