|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-18-2012, 02:01 PM
|
#1 |
|
Registered User
Join Date: May 2010
Location: beckley, WV.
Posts: 823
|
Rear Sway Bar Instructions
I bought a rear sway bar from a member awhile back and am just getting around to installing it and am at a loss. I have no idea on how to mount it, or where to mount it. I have coil springs on the rear. With the trailing arms. I took a couple of pictures i will post. Any help on this would be appreciated. Thanks Pete
__________________
Pete The worst I ever had was wonderful  69 SWB work in progress 97 Ranger 6in. lift on 35's 04 325i lady's ride |
|
|
|
04-18-2012, 02:40 PM
|
#2 |
|
C-10 Club Member
Join Date: Mar 2010
Location: Corona,CA
Posts: 1,001
|
Re: Rear Sway Bar Instructions
__________________
1969 Short Fleet 350/SM465 4.5/6.5 ECE drop 20" Raceline Wheels 1998 2dr Tahoe 5/7 drop 20"/22" Coys-sold Build thread...http://67-72chevytrucks.com/vboard/s...d.php?t=401910 |
|
|
|
|
04-18-2012, 04:30 PM
|
#3 |
|
Registered User
Join Date: May 2010
Location: beckley, WV.
Posts: 823
|
Re: Rear Sway Bar Instructions
Thanks for the info.
Posted via Mobile Device
__________________
Pete The worst I ever had was wonderful 69 SWB work in progress 97 Ranger 6in. lift on 35's 04 325i lady's ride |
|
|
|
|
04-18-2012, 04:58 PM
|
#4 |
|
VA72C10
 
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
|
Re: Rear Sway Bar Instructions
Be sure to post up some pics when you're done...might make a good future faq!
__________________
Looking for a 67-72 swb or blazer project in or around VA. 
|
|
|
|
|
04-18-2012, 05:11 PM
|
#5 |
|
Registered User
Join Date: May 2010
Location: beckley, WV.
Posts: 823
|
Re: Rear Sway Bar Instructions
I hope to get it on by the weekend. I bought some 2" drop blocks. I think I'll inatall those first. Don't want to have to redrill the holes.
Posted via Mobile Device
__________________
Pete The worst I ever had was wonderful 69 SWB work in progress 97 Ranger 6in. lift on 35's 04 325i lady's ride |
|
|
|
|
04-18-2012, 05:22 PM
|
#6 |
|
Registered User
Join Date: May 2010
Location: beckley, WV.
Posts: 823
|
Re: Rear Sway Bar Instructions
By the looks of the pictures I posted. I don't see the L bracket there showing. I bought that awhile back. Guess I should have done my research then. I don't even remember who I bought it from now. Guess I'll have to rig something up. Oh well somebody has a set of L brackets without a sway bar
 Posted via Mobile Device
__________________
Pete The worst I ever had was wonderful 69 SWB work in progress 97 Ranger 6in. lift on 35's 04 325i lady's ride |
|
|
|
|
04-19-2012, 12:04 AM
|
#7 |
|
Registered User
Join Date: Oct 2011
Location: Ithaca NY
Posts: 251
|
Re: Rear Sway Bar Instructions
the angle piece is made out of 1/4" thick x 2" angle iron, the frame side is drilled 3/8" with a bolt, lock washer, and nut, the bar side is drilled to the "nipple" of the bushing. don't know if nipple is the right word, but it works well enough I guess
__________________
"To speak of the art of one loom, the art of one river, the art of one tractor, or the art of one automobile is not preposterous; it is to point to the size and importance of the gap between general knowledge and situated knowledge" - James C. Scott 1969 C10 - http://67-72chevytrucks.com/vboard/s...d.php?t=492064 1930 Tudor Sedan |
|
|
|
|
04-19-2012, 06:22 AM
|
#8 |
|
Registered User
Join Date: May 2010
Location: beckley, WV.
Posts: 823
|
Re: Rear Sway Bar Instructions
I was hoping that would work. I was thinking the same thing. Thanks
Posted via Mobile Device
__________________
Pete The worst I ever had was wonderful 69 SWB work in progress 97 Ranger 6in. lift on 35's 04 325i lady's ride |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
