KS '70 Chevrolet Grill F/S - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ironhorse** · 03-19-2011, 08:54 PM

Well I asked in the WIW section and got no response so will give it my best shot. Original GM grill removed from a '70 Chevy 3/4 ton. The tabs at one end have a small section missing at one tab above and one tab below. Still mounted firm. Could use small washer to increase pressure when mounting. The rest of the grill is intact with no cracks or damage. Will ship for actual shipping charges and buyer's shipping container request. Wrapped and shipped in a cardboard box or build a wood frame box and cover with MDF or some such wood paneling. Will do my best to "scrounge" material so that cost is low, then actual shipping costs via UPS insured. $60 for the grill plus boxing material if requested and needed.

**Ironhorse** · 03-21-2011, 08:41 AM

Monday morning bump

**Ironhorse** · 03-22-2011, 04:36 PM

Lots of looks but no takers? Am I too high or does shipping kill any interest?

**Ironhorse** · 03-23-2011, 04:57 PM

One more ttt

VA72C10 · 03-23-2011, 06:21 PM

Good price IMHO! Might want to get an estimated ship cost for those that might be concerned about it (over estimating)

**Ironhorse** · 03-23-2011, 09:07 PM

I thought the price was good but am unsure about a shipping cost as that varies with the distance between myself and the buyer. I can build a box and pack it with wrapping/foam but the distance makes the shipping costs.

glimmertwin01 · 03-24-2011, 04:16 PM

thats a good price but the shippers could really do some damage.... correct me if im wrong but arent 70 grille inserts the one No One repops?

VA72C10 · 03-24-2011, 04:29 PM

Quote:

Originally Posted by glimmertwin01

thats a good price but the shippers could really do some damage.... correct me if im wrong but arent 70 grille inserts the one No One repops?

Actually I was just edjumacated

on this recently. All repops are 70's with the raised portion....but they're not painted correctly with the black on the basic sections and silver on the raised. The 69's are the ones that aren't reproduced. They were just the simple egg crate with no raised areas.

**Ironhorse** · 03-24-2011, 06:15 PM

I'll defer to someone on this as I really don't know. Will buy what VA72C10 says as being correct, sounds right to me. For the shipping on the grill I figure to frame a box using 1x6 or 1x8 pine whichever is needed and then cover with some used paneling or such. Run some 1x2's cross ways under the panel and bubblewrap & or foam wrap the grill. That is when some one actually seems interested. Other wise I guess it hangs on the wall in the shop.

03-19-2011, 08:54 PM	#1
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,087	'70 Chevrolet Grill F/S Well I asked in the WIW section and got no response so will give it my best shot. Original GM grill removed from a '70 Chevy 3/4 ton. The tabs at one end have a small section missing at one tab above and one tab below. Still mounted firm. Could use small washer to increase pressure when mounting. The rest of the grill is intact with no cracks or damage. Will ship for actual shipping charges and buyer's shipping container request. Wrapped and shipped in a cardboard box or build a wood frame box and cover with MDF or some such wood paneling. Will do my best to "scrounge" material so that cost is low, then actual shipping costs via UPS insured. $60 for the grill plus boxing material if requested and needed. Attached Images __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

03-21-2011, 08:41 AM	#2
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,087	Re: '70 Chevrolet Grill F/S Monday morning bump __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

03-22-2011, 04:36 PM	#3
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,087	Re: '70 Chevrolet Grill F/S Lots of looks but no takers? Am I too high or does shipping kill any interest? __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

03-23-2011, 04:57 PM	#4
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,087	Re: '70 Chevrolet Grill F/S One more ttt __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

03-23-2011, 06:21 PM	#5
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: '70 Chevrolet Grill F/S Good price IMHO! Might want to get an estimated ship cost for those that might be concerned about it (over estimating) __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 03-23-2011 at 06:22 PM.

03-23-2011, 09:07 PM	#6
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,087	Re: '70 Chevrolet Grill F/S I thought the price was good but am unsure about a shipping cost as that varies with the distance between myself and the buyer. I can build a box and pack it with wrapping/foam but the distance makes the shipping costs. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

03-24-2011, 04:16 PM	#7
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: '70 Chevrolet Grill F/S thats a good price but the shippers could really do some damage.... correct me if im wrong but arent 70 grille inserts the one No One repops? __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

03-24-2011, 06:15 PM	#9
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,087	Re: '70 Chevrolet Grill F/S I'll defer to someone on this as I really don't know. Will buy what VA72C10 says as being correct, sounds right to me. For the shipping on the grill I figure to frame a box using 1x6 or 1x8 pine whichever is needed and then cover with some used paneling or such. Run some 1x2's cross ways under the panel and bubblewrap & or foam wrap the grill. That is when some one actually seems interested. Other wise I guess it hangs on the wall in the shop. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.