71 door panels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

eastxbbqman · 03-04-2020, 10:55 AM

I have been putting a 71 back together and the doors are off an earlier model. I had some real nice white vinyl panels that came off my original doors. The screw holes don't match up on the bottom. I thought about drilling new holes, but don't want to screw it up.

Thealien · 03-04-2020, 12:57 PM

pictures of doors might help. I thought the doors were the same 1967-1971 with the change being 1972? But I am not sure which is why I suggested a picture.

eastxbbqman · 03-04-2020, 05:22 PM

I thought the change was 72 as well. Will try to get pics tonight.

**StingRay** · 03-04-2020, 07:46 PM

I think the panels transitioned in late 71. I have a deluxe set of parchment panels that do not have the single recessed screw hole on the back edge. There are two added screws that look like they were added at the factory or dealer. I have never seen any 72 like this before. If actually 72 they'd be one of the very early 72's.

eastxbbqman · 03-05-2020, 10:11 AM

Quote:

Originally Posted by StingRay

I think the panels transitioned in late 71. I have a deluxe set of parchment panels that do not have the single recessed screw hole on the back edge. There are two added screws that look like they were added at the factory or dealer. I have never seen any 72 like this before. If actually 72 they'd be one of the very early 72's.

I think my panels are exactly as yours. Gonna have to look tonight. They are parchment deluxe. When I tried to install them the outside holes didn't line up.

eastxbbqman · 03-08-2020, 12:19 PM

Here's a pic

**StingRay** · 03-09-2020, 10:50 PM

Nope I have a set of 72 style deluxe plastic that do not have the factory screw holes. Only set I've ever seen.

Quote:

Originally Posted by eastxbbqman

I think my panels are exactly as yours. Gonna have to look tonight. They are parchment deluxe. When I tried to install them the outside holes didn't line up.

03-04-2020, 10:55 AM	#1
eastxbbqman Registered User Join Date: May 2011 Location: winnsboro,tx Posts: 103	71 door panels I have been putting a 71 back together and the doors are off an earlier model. I had some real nice white vinyl panels that came off my original doors. The screw holes don't match up on the bottom. I thought about drilling new holes, but don't want to screw it up.

03-04-2020, 12:57 PM	#2
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,120	Re: 71 door panels pictures of doors might help. I thought the doors were the same 1967-1971 with the change being 1972? But I am not sure which is why I suggested a picture. __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

03-04-2020, 05:22 PM	#3
eastxbbqman Registered User Join Date: May 2011 Location: winnsboro,tx Posts: 103	Re: 71 door panels I thought the change was 72 as well. Will try to get pics tonight.

03-04-2020, 07:46 PM	#4
StingRay Senior Member Join Date: Mar 2000 Location: Saskatoon,SK,Canada Posts: 2,476	Re: 71 door panels I think the panels transitioned in late 71. I have a deluxe set of parchment panels that do not have the single recessed screw hole on the back edge. There are two added screws that look like they were added at the factory or dealer. I have never seen any 72 like this before. If actually 72 they'd be one of the very early 72's. __________________ Saskatoon, Saskatchewan Canada

03-08-2020, 12:19 PM	#6
eastxbbqman Registered User Join Date: May 2011 Location: winnsboro,tx Posts: 103	Re: 71 door panels Here's a pic Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.