Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
09-23-2023, 03:29 PM | #1 |
Registered User
Join Date: Oct 2012
Location: Plymouth In.
Posts: 100
|
compression for a LS 1
What kind of compression should a 1999 LS 1 have? I have a couple of cylinders that have 100 and 105lbs, thinking about pulling motor and replacing it.
|
09-23-2023, 04:37 PM | #2 |
Registered User
Join Date: Jun 2015
Location: Carlos MN
Posts: 2,091
|
Re: compression for a LS 1
If you don't get an answer here I check with the folks over on LS1tech.com.
|
09-23-2023, 05:10 PM | #3 |
Moderator
Join Date: Jun 2017
Location: Cherryville, NC
Posts: 2,204
|
Re: compression for a LS 1
"Blower cam" ?
Any long duration cams will drop initial compression pressure. "Normal" numbers would be around 160 to 175 with no more than a 30% variation between highest and lowest numbers. Figures of 100 to 105 etc should really be subject to a leak down test before making any rebuild decisions.
__________________
Family and country before all others... 2006 Chevy Silverado (Daily Driver) 2012 Chevy Equinox |
09-26-2023, 06:06 PM | #4 |
Senior Member
Join Date: Mar 2015
Location: washington
Posts: 2,280
|
Re: compression for a LS 1
On my LT1, I had over 150psi on all cylinders with a BTR Stage II camshaft.
If your compression is low it's a 90% chance refreshing the heads will fix it. A decent Lt1 will bring about $2500 in my area. Worth repairing if it's the heads. |
Bookmarks |
|
|