rear bumper pics? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sganje · 09-06-2006, 11:45 PM

Anybody have any pics of there rear bumper with spare tire carrier? I think I am going to try and make something and would like some ideas before I start. How thick of steel should I use? Please post some pics thanks.

sganje · 09-13-2006, 12:22 AM

Nobody has a rear bumper with a spare tire carrier that isn't stock? I thought I might get at least 1 pisture. Thanks

tpi72blazer · 09-13-2006, 08:08 AM

Quote:

Originally Posted by sganje

Nobody has a rear bumper with a spare tire carrier that isn't stock? I thought I might get at least 1 pisture. Thanks

Contact BobbyK - he has one he built for his Blazer which is very nice. If memeory serves, he even has blueprints to build one.

sganje · 09-15-2006, 08:23 PM

thanks

**special-K** · 09-16-2006, 08:02 AM

Drink2many has pictures on his Blackbird's link.

earl87gta · 09-18-2006, 12:13 AM

I have a cool one that is for a stock bumper it bolts in between the bumper not the body and has gas shock that lets you lower it down so you can lower the tail gate it will hold a 35in tire with no trouble . I don’t have it on my blazer right now blazer is tore down an getting a face lift but I if you think its something you would like to see Ill snap a pic of it for you

71jimmy · 09-18-2006, 01:34 AM

Quote:

Originally Posted by earl87gta

if you think its something you would like to see Ill snap a pic of it for you

YEAH, YEAH, YEAH, would like to see. Tell us were you got it also.

LUV2XCLR8 · 09-18-2006, 02:54 PM

BobbyK · 09-19-2006, 11:13 PM

I didn't build the bumper...just the tire carrier.

That's a 33" tire mounted to it.

Click HERE to see ALL the pic's I took while building the carrier.

vtblazer · 09-20-2006, 06:27 AM

Here's another version of the same thing.

That's a 36" spare mounted on it.

Burt4x4 · 09-22-2006, 02:00 PM

I built mine...made it hold the tire higher up as I was allways draging my spare with the old gate I had..

LUV2XCLR8 · 09-22-2006, 04:31 PM

Quote:

Originally Posted by Burt4x4

Cool, it made a perfect home for the hi-lft jack

earl87gta · 09-26-2006, 02:29 AM

Soorry I havnt got you pics yet if i have time Ill take a few tomarrow for you. only problem is I dont have a stock bumper to set it up aganst so it may be hard to tell how it mounts. but it is a cool set up instead of swinging a way to the side it drops down like the tale gate and uses a gas shock to make it easy to lift and lower.

**71blksuper4x4** · 09-27-2006, 12:25 PM

This one is on a blazer I am still trying to buy.....

earl87gta · 09-28-2006, 02:05 AM

Here is a link to the tire carrier I have its kinda cool no holes in the body needed. It bolts to the bumper you can use one bumper bolt but you need to drill one too . You will also need to drill one for the pin that hold it in place when up. But I would rather change a pumper if I get tired of it then have to fill holes in the body and paint .it folds down like the tale gate does . Im not sure who made it but it is a universal fit you can move the lugs to fit any wheel . The gas shock is strong and makes lifting the tire easy. I was going to take a pic with it in the down position but I couldn’t hold the crow bar and take the pic. It will hold a 35 in tire so it would be great for some one with 33s it looks like it would be easy to make theirs not a lot to it.

http://pg.photos.yahoo.com/ph/earl87...owWkFBSlnhH3zd

09-06-2006, 11:45 PM	#1
sganje Registered User Join Date: Sep 2004 Location: Colorado Posts: 47	rear bumper pics? Anybody have any pics of there rear bumper with spare tire carrier? I think I am going to try and make something and would like some ideas before I start. How thick of steel should I use? Please post some pics thanks. __________________ 1970 Blazer 4WD fixing rust. Does it every end!

09-13-2006, 12:22 AM	#2
sganje Registered User Join Date: Sep 2004 Location: Colorado Posts: 47	Re: rear bumper pics? Nobody has a rear bumper with a spare tire carrier that isn't stock? I thought I might get at least 1 pisture. Thanks __________________ 1970 Blazer 4WD fixing rust. Does it every end!

09-15-2006, 08:23 PM	#4
sganje Registered User Join Date: Sep 2004 Location: Colorado Posts: 47	Re: rear bumper pics? thanks __________________ 1970 Blazer 4WD fixing rust. Does it every end!

09-16-2006, 08:02 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: rear bumper pics? Drink2many has pictures on his Blackbird's link. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-18-2006, 12:13 AM	#6
earl87gta Senior Member Join Date: Dec 2003 Location: Kingsport TN Posts: 4,641	Re: rear bumper pics? I have a cool one that is for a stock bumper it bolts in between the bumper not the body and has gas shock that lets you lower it down so you can lower the tail gate it will hold a 35in tire with no trouble . I don’t have it on my blazer right now blazer is tore down an getting a face lift but I if you think its something you would like to see Ill snap a pic of it for you __________________ Earl 68 2500 4x4 GMC Burb

09-18-2006, 02:54 PM	#8
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	Re: rear bumper pics? __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

09-19-2006, 11:13 PM	#9
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,771	Re: rear bumper pics? I didn't build the bumper...just the tire carrier. That's a 33" tire mounted to it. Click HERE to see ALL the pic's I took while building the carrier. __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE Last edited by BobbyK; 09-19-2006 at 11:15 PM.

09-20-2006, 06:27 AM	#10
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Re: rear bumper pics? Here's another version of the same thing. That's a 36" spare mounted on it. Attached Images

09-22-2006, 02:00 PM	#11
Burt4x4 Registered User Join Date: Feb 2000 Location: Modesto, CA Posts: 1,842	Re: rear bumper pics? I built mine...made it hold the tire higher up as I was allways draging my spare with the old gate I had.. __________________ 1972 K5 MPFI454/Sm465/Np205/D60/14FFd/Re-Centerd H1s w/Swamper Iroks

09-26-2006, 02:29 AM	#13
earl87gta Senior Member Join Date: Dec 2003 Location: Kingsport TN Posts: 4,641	Re: rear bumper pics? Soorry I havnt got you pics yet if i have time Ill take a few tomarrow for you. only problem is I dont have a stock bumper to set it up aganst so it may be hard to tell how it mounts. but it is a cool set up instead of swinging a way to the side it drops down like the tale gate and uses a gas shock to make it easy to lift and lower. __________________ Earl 68 2500 4x4 GMC Burb

09-27-2006, 12:25 PM	#14
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,151	Re: rear bumper pics? This one is on a blazer I am still trying to buy..... Attached Images __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

09-28-2006, 02:05 AM	#15
earl87gta Senior Member Join Date: Dec 2003 Location: Kingsport TN Posts: 4,641	Re: rear bumper pics? Here is a link to the tire carrier I have its kinda cool no holes in the body needed. It bolts to the bumper you can use one bumper bolt but you need to drill one too . You will also need to drill one for the pin that hold it in place when up. But I would rather change a pumper if I get tired of it then have to fill holes in the body and paint .it folds down like the tale gate does . Im not sure who made it but it is a universal fit you can move the lugs to fit any wheel . The gas shock is strong and makes lifting the tire easy. I was going to take a pic with it in the down position but I couldn’t hold the crow bar and take the pic. It will hold a 35 in tire so it would be great for some one with 33s it looks like it would be easy to make theirs not a lot to it. http://pg.photos.yahoo.com/ph/earl87...owWkFBSlnhH3zd __________________ Earl 68 2500 4x4 GMC Burb



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.