steering wheel gap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gr8scott51 · 01-26-2004, 04:43 PM

I put a Lumina wheel on my stock column this weekend. Love the wheel, but I have about a 1/4" gap between the wheel and the column. Anybody else had to fix this problem?

Scott

smokekiki · 01-26-2004, 05:17 PM

Under the hood, at the lower part of the colum there are 3 screws around the colum.loosen these screws and rotate them around the colum.This will move the wheel in and out a little.Should close the gap for you.

gr8scott51 · 01-26-2004, 05:22 PM

Thanks!!

01-26-2004, 04:43 PM	#1
gr8scott51 Registered User Join Date: Mar 2003 Location: Bremerton, WA Posts: 1,839	steering wheel gap I put a Lumina wheel on my stock column this weekend. Love the wheel, but I have about a 1/4" gap between the wheel and the column. Anybody else had to fix this problem? Scott __________________ Silence is golden, duct tape is silver. - Scott

01-26-2004, 05:17 PM	#2
smokekiki Mike Join Date: Jan 2003 Location: west chester pa Posts: 2,474	Under the hood, at the lower part of the colum there are 3 screws around the colum.loosen these screws and rotate them around the colum.This will move the wheel in and out a little.Should close the gap for you. __________________ 70'c/10, 71 suburban4x4 402bb, 72suburban 4/6 drop, 72k/5 4x4 blazer 4" lift 35 tires

01-26-2004, 05:22 PM	#3
gr8scott51 Registered User Join Date: Mar 2003 Location: Bremerton, WA Posts: 1,839	Thanks!! __________________ Silence is golden, duct tape is silver. - Scott



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.