KS Longhorn bed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 07-07-2013, 05:16 PM

Just in I'll parting the rest of the truck in a couple weeks, this thread is for bed only. It has some rust behind driver rear tire and also small spot of rust behind pass tire. Pass rear quarter has some dents but all are fixable. A few other small dings in it but not many. Front panel has a dent. No other rust than the 2 spots I have pics of. $200 Thanks Randy

teeitup · 07-07-2013, 05:18 PM

more

**72ironmike** · 07-07-2013, 06:11 PM

Nice ! Don't see many Longhorn Beds.

teeitup · 07-07-2013, 10:19 PM

Thanks Mike, I've only had 4 or 5 through the years but none as good of shape as this one.
Also THANKS for working with me on the front clip, I had a little accident unloading it out of the longhorn by myself and ended up bending up one of those NOS hinges unfortunately, I was po'd

**72ironmike** · 07-07-2013, 10:39 PM

Bummer !

Quote:

Originally Posted by teeitup

Thanks Mike, I've only had 4 or 5 through the years but none as good of shape as this one.
Also THANKS for working with me on the front clip, I had a little accident unloading it out of the longhorn by myself and ended up bending up one of those NOS hinges unfortunately, I was po'd

70LonghornCST · 07-08-2013, 12:51 AM

Nice. It's very hard to come across one without the dealer fuel doors cut out.

**Don Brace** · 07-08-2013, 09:38 AM

Randy
If you decide to part I would like the bed trim and the splash guards. Do you have a passenger side splash guard for the bed?
Don Brace MN

**davischevy** · 07-08-2013, 10:44 PM

Put me in line for the moldings/trim, if you part it out.

teeitup · 07-14-2013, 09:36 AM

Thanks everyone,
I'm not planning on parting the bed out yet, I will let you know if I do.
Randy

Hard_Rain420 · 07-14-2013, 08:36 PM

Interested in the rear drive shaft if the truck has the Eaton HO52?

bronze 72 super · 07-14-2013, 08:43 PM

Say, just to make you guys jealous, I have three Longhorn beds in my yard. One is sitting on a 72 Super frame, this one has the tool storage box plus the factory aux. fuel tank. Very little to no rust. It's going on my 71 project truck. The one on that truck will go on my 70 project truck, a few years down the road. The one on the 70 truck will more that likely get parted out, or scrapped. Any one in the local Portland Oregon area looking for a good Longhorn frame?

teeitup · 07-14-2013, 11:42 PM

Hard_Rain420, I will measure it for you

bronze 72 super, we just don't find them around here very often

Thanks Randy

**special-K** · 07-16-2013, 07:17 AM

Don't pull that trim! Having that is what makes this bed appealing to me. Wish I could come grab it.

teeitup · 07-31-2013, 06:59 PM

$200 for it now!!!

nobolt · 08-08-2013, 05:47 AM

Randy,
I saw your question about making an 8' bed and would like to get in line for the extra 6"
I cant believe no one wants this bed though.....its been here for a month! LOL

101 DUSTOFF · 08-08-2013, 01:28 PM

Quote:

Originally Posted by nobolt

Randy,
I cant believe no one wants this bed though.....its been here for a month! LOL

I dont think it's still there due to a lack of interest or unreasonable pricing, I need a longhorn bed and would gladly give the asking price but I live 9 hours away in TN. It would cost me three times that much to drive out there and get it. ...assuming I could get the the time off to do so.

mytruck70 · 08-08-2013, 01:43 PM

IF you do part it I would like a shipping price on the pass side fender to 27520

I have 69 gmc custom camper 8 1/2 feet ( aka longhorn ) and needs a bed side
and maybe the end cap

I know shipping will be out the roof but I would like to see the price any I would be more then glad to pay the asking price of this if I was closer

the my zip is 27520

teeitup · 08-08-2013, 03:37 PM

Sorry guys I'm not going to part it out, I can haul it to the golf course and it can sit over there till someone wants it. Thanks Randy

Hard_Rain420 · 08-08-2013, 05:41 PM

The golf course? LOL!.... Ok

teeitup · 08-08-2013, 10:10 PM

Thats my storage place, lol

**Don Brace** · 08-08-2013, 10:16 PM

Post which bed side you need and I look and see which 6 inch side I have. You can add it to an eight foot bed side to make a Long horn bed side. I did this for one of my Long Horns.
Don Brace MN

**Cash3481** · 08-08-2013, 11:02 PM

Dang Randy,
At that price I'd make a bed trailer out of it and haul/store wheels and tires in it. Or... Use it to take your wares to the swap meets.
Mike
Posted via Mobile Device

Vintage Windmills · 08-08-2013, 11:28 PM

I could maybe haul between KS and MN if someone is serious. Randy, do you think I'd have room? Maybe if the topper will fit on my HD?

teeitup · 08-13-2013, 09:02 PM

Thanks Jud for the offer!!!!!!!!!!

Mike, it may end up being a trailer, I still have the longhorn frame at the golf course

Guys its $200 for it now!!!!!!!!!!

teeitup · 10-08-2013, 08:38 PM

$150 cash

07-07-2013, 05:16 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Longhorn bed Just in I'll parting the rest of the truck in a couple weeks, this thread is for bed only. It has some rust behind driver rear tire and also small spot of rust behind pass tire. Pass rear quarter has some dents but all are fixable. A few other small dings in it but not many. Front panel has a dent. No other rust than the 2 spots I have pics of. $200 Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 08-13-2013 at 09:00 PM.

07-07-2013, 05:18 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Longhorn bed more Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-07-2013, 06:11 PM	#3
72ironmike Senior Member Join Date: Jan 2004 Location: Olathe KS (Greater Kansas City MO Area) Posts: 2,054	Re: Longhorn bed Nice ! Don't see many Longhorn Beds.

07-07-2013, 10:19 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Longhorn bed Thanks Mike, I've only had 4 or 5 through the years but none as good of shape as this one. Also THANKS for working with me on the front clip, I had a little accident unloading it out of the longhorn by myself and ended up bending up one of those NOS hinges unfortunately, I was po'd __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-08-2013, 12:51 AM	#6
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Longhorn bed Nice. It's very hard to come across one without the dealer fuel doors cut out. __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

07-08-2013, 09:38 AM	#7
Don Brace Active Member Join Date: Nov 2002 Location: Clarks Grove MN Posts: 487	Re: Longhorn bed Randy If you decide to part I would like the bed trim and the splash guards. Do you have a passenger side splash guard for the bed? Don Brace MN __________________ Don Brace 55 Nomad 56 Nomad 58 Impalla Coupe 58 Bel-Aire 4D HT 61 Impala CVRT 409 4 SP 2- 71 Longhorns Always looking for old toy trains, Juke boxes Pin ball and game machines.

07-08-2013, 10:44 PM	#8
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,794	Re: Longhorn bed Put me in line for the moldings/trim, if you part it out.

07-14-2013, 09:36 AM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Longhorn bed Thanks everyone, I'm not planning on parting the bed out yet, I will let you know if I do. Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-14-2013, 08:36 PM	#10
Hard_Rain420 Registered User Join Date: Oct 2012 Location: Melbourne FL Posts: 201	Re: Longhorn bed Interested in the rear drive shaft if the truck has the Eaton HO52?

07-14-2013, 08:43 PM	#11
bronze 72 super Registered User Join Date: Sep 2007 Location: Rufus Oregon Posts: 1,187	Re: Longhorn bed Say, just to make you guys jealous, I have three Longhorn beds in my yard. One is sitting on a 72 Super frame, this one has the tool storage box plus the factory aux. fuel tank. Very little to no rust. It's going on my 71 project truck. The one on that truck will go on my 70 project truck, a few years down the road. The one on the 70 truck will more that likely get parted out, or scrapped. Any one in the local Portland Oregon area looking for a good Longhorn frame?

07-14-2013, 11:42 PM	#12
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Longhorn bed Hard_Rain420, I will measure it for you bronze 72 super, we just don't find them around here very often Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-16-2013, 07:17 AM	#13
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Longhorn bed Don't pull that trim! Having that is what makes this bed appealing to me. Wish I could come grab it. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-31-2013, 06:59 PM	#14
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Longhorn bed $200 for it now!!! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 08-13-2013 at 09:00 PM.

08-08-2013, 05:47 AM	#15
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: Longhorn bed Randy, I saw your question about making an 8' bed and would like to get in line for the extra 6" I cant believe no one wants this bed though.....its been here for a month! LOL __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

08-08-2013, 01:43 PM	#17
mytruck70 Registered User Join Date: Apr 2012 Location: clayton, NC Posts: 139	Re: Longhorn bed IF you do part it I would like a shipping price on the pass side fender to 27520 I have 69 gmc custom camper 8 1/2 feet ( aka longhorn ) and needs a bed side and maybe the end cap I know shipping will be out the roof but I would like to see the price any I would be more then glad to pay the asking price of this if I was closer the my zip is 27520



Register or Log In To remove these advertisements.

08-08-2013, 03:37 PM	#18
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Longhorn bed Sorry guys I'm not going to part it out, I can haul it to the golf course and it can sit over there till someone wants it. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-08-2013, 05:41 PM	#19
Hard_Rain420 Registered User Join Date: Oct 2012 Location: Melbourne FL Posts: 201	Re: Longhorn bed The golf course? LOL!.... Ok

08-08-2013, 10:10 PM	#20
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Longhorn bed Thats my storage place, lol __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-08-2013, 10:16 PM	#21
Don Brace Active Member Join Date: Nov 2002 Location: Clarks Grove MN Posts: 487	Re: Longhorn bed Post which bed side you need and I look and see which 6 inch side I have. You can add it to an eight foot bed side to make a Long horn bed side. I did this for one of my Long Horns. Don Brace MN __________________ Don Brace 55 Nomad 56 Nomad 58 Impalla Coupe 58 Bel-Aire 4D HT 61 Impala CVRT 409 4 SP 2- 71 Longhorns Always looking for old toy trains, Juke boxes Pin ball and game machines.

08-08-2013, 11:02 PM	#22
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Longhorn bed Dang Randy, At that price I'd make a bed trailer out of it and haul/store wheels and tires in it. Or... Use it to take your wares to the swap meets. Mike Posted via Mobile Device

08-08-2013, 11:28 PM	#23
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Longhorn bed I could maybe haul between KS and MN if someone is serious. Randy, do you think I'd have room? Maybe if the topper will fit on my HD? __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

08-13-2013, 09:02 PM	#24
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Longhorn bed Thanks Jud for the offer!!!!!!!!!! Mike, it may end up being a trailer, I still have the longhorn frame at the golf course Guys its $200 for it now!!!!!!!!!! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-08-2013, 08:38 PM	#25
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Longhorn bed $150 cash __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.