parting a 66 3/4 ton AZ - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**t korinek** · 07-23-2009, 01:20 AM

Parting out a 66 custom cab 3/4 ton truck.. cab chrome pieces in good shape SOLD! see anything else you need ask & I'll price it.
Thanks,
Tom

**DPowers** · 07-23-2009, 10:17 AM

Instrument panel?
Any engine brackets?
Visors?

Thanks

ob1monkey · 07-23-2009, 02:32 PM

Inner wheel tubs?

283 Man · 07-24-2009, 02:40 AM

does it have 4 speed trans. how much for it do you do any trades?

gostranger · 07-24-2009, 05:34 AM

tail gate shipped to 14532 fleet side?

**t korinek** · 07-25-2009, 01:07 AM

dpowers $35 + shipping for the gauge panel & what color visors? What engine brackets are you looking for?

ob1monkey, no inner wheel wells

283 man, it does have a 4speed I'll take $50 for it

gostranger, how good of a tailgate you looking for?

283 Man · 07-25-2009, 02:50 AM

I have a 230 6 cylinder that I would like to trade for the 4 speed.

gostranger · 07-25-2009, 07:37 AM

if you have more than one let me know the different conditions i am looking for a good one but it doesnt have to be perfect and the price has to be real good due to the shipping thanks for the reply

**t korinek** · 07-25-2009, 10:53 AM

283 man, I have no Idea how we would do a trade like that unless you were making a trip to az, shipping an engine would cost around $200

gostranger, I'll get pics of what I have

**DPowers** · 07-25-2009, 06:42 PM

Shipping to 37821 for the dash?
Looking for fawn colored visors.
Is the motor 6 cyl or V8? V8 stuff is what I would be looking for.

bubba327 · 07-25-2009, 07:25 PM

looking for power steering brackets for inline 6 230/250/292.

waltpittman · 07-27-2009, 01:28 AM

Do you have a good gas tank for sale in that truck.

**ScottH** · 07-27-2009, 02:04 PM

Tom, what kind of shape is the steering wheel in? How much shipped to 08753?

Also looking for fleetside bed molding in good shape.

Thanks.

Scott

**t korinek** · 07-28-2009, 02:16 AM

Scott I will check on that stuff,
waltpittman, yes have a good tank, you would have to pick up no shipping on a tank$25

Bubba, no pwr steering for 6 cylinders, in fact I just bought a set from another member for a freinds 6 cyl. truck.

Dpowers $15 shipping on the dash & I think we have a pair of the fawn visors give me a couple days to get pics

Go stranger heres a pic of the best one, 3 small dings from the inside, no rust except surface rust $175 + shipping

gostranger · 07-28-2009, 08:26 AM

t korinek the tail gate looks good another member just offered me his tail gate for 100 shipped i will look at that one thanks for the reply good luck with the sale!!

**DPowers** · 07-28-2009, 11:20 AM

PM sent

**ScottH** · 07-28-2009, 12:08 PM

Tom, r u parting the red one? Might be interested in some bed parts (if separating) and the rear bumper.

jchav62 · 07-28-2009, 04:16 PM

Is it a v8 truck? Does it have a fan shroud?

Rusteeze64GB · 07-29-2009, 04:40 PM

I live in Mesa, i am interested in the rear bumper if the other guy is out. What lug pattern do you have on in those wheels. I am looking for 6 lug drums. I have 8 lug drums on my 1964 GMC right now. Let me know...

Rusteeze64GB · 07-29-2009, 04:43 PM

Also what is the condition of that bench seat in that truck. Mine is shot. Let me know.

**t korinek** · 07-30-2009, 12:00 AM

rusteeze I have a good bench seat $75 & I have 6 lug suspension stuff & other 63-66 trucks give me a call 480-241-1318

jchav62 I dont have a fan shroud for these years

ScottH not parting the red one, was just going to sell the gate if someone wanted it, the whole truck is for sale $1300 runs & drives, v8 auto, nice bed as seen, stainless strips & oak wood, nice front & rear bumpers, some rust,nice wheels.

**ScottH** · 07-30-2009, 09:10 AM

If I didn't have to pay for shipping on that truck I would have bought it already! PM sent

Still looking for custom side body trim.

70 net440 · 08-02-2009, 06:29 PM

I need a GOOD driver side door striker. Maybe a driver side door depending on price and shipping to 96097(Nor Cal)

70 net440 · 08-02-2009, 06:32 PM

Forgot, I need this stuff for a 63.

C10Slim · 08-02-2009, 08:34 PM

Still have the instrument panel??

07-23-2009, 01:20 AM	#1
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	parting a 66 3/4 ton AZ Parting out a 66 custom cab 3/4 ton truck.. cab chrome pieces in good shape SOLD! see anything else you need ask & I'll price it. Thanks, Tom Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ! Last edited by t korinek; 08-17-2009 at 10:01 PM. Reason: sold the chrome pieces

07-23-2009, 10:17 AM	#2
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,435	Re: parting a 66 3/4 ton AZ Instrument panel? Any engine brackets? Visors? Thanks

07-23-2009, 02:32 PM	#3
ob1monkey Registered User Join Date: Dec 2008 Location: sanford,fl Posts: 185	Re: parting a 66 3/4 ton AZ Inner wheel tubs?

07-24-2009, 02:40 AM	#4
283 Man Registered User Join Date: Apr 2007 Location: Jane,Missouri Posts: 844	Re: parting a 66 3/4 ton AZ does it have 4 speed trans. how much for it do you do any trades? __________________ 283 the mighty small block

07-24-2009, 05:34 AM	#5
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	Re: parting a 66 3/4 ton AZ tail gate shipped to 14532 fleet side?

07-25-2009, 01:07 AM	#6
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: parting a 66 3/4 ton AZ dpowers $35 + shipping for the gauge panel & what color visors? What engine brackets are you looking for? ob1monkey, no inner wheel wells 283 man, it does have a 4speed I'll take $50 for it gostranger, how good of a tailgate you looking for? Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

07-25-2009, 02:50 AM	#7
283 Man Registered User Join Date: Apr 2007 Location: Jane,Missouri Posts: 844	Re: parting a 66 3/4 ton AZ I have a 230 6 cylinder that I would like to trade for the 4 speed. __________________ 283 the mighty small block

07-25-2009, 07:37 AM	#8
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	Re: parting a 66 3/4 ton AZ if you have more than one let me know the different conditions i am looking for a good one but it doesnt have to be perfect and the price has to be real good due to the shipping thanks for the reply

07-25-2009, 10:53 AM	#9
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: parting a 66 3/4 ton AZ 283 man, I have no Idea how we would do a trade like that unless you were making a trip to az, shipping an engine would cost around $200 gostranger, I'll get pics of what I have __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

07-25-2009, 06:42 PM	#10
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,435	Re: parting a 66 3/4 ton AZ Shipping to 37821 for the dash? Looking for fawn colored visors. Is the motor 6 cyl or V8? V8 stuff is what I would be looking for. Last edited by DPowers; 07-25-2009 at 06:42 PM.

07-25-2009, 07:25 PM	#11
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: parting a 66 3/4 ton AZ looking for power steering brackets for inline 6 230/250/292. __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project"

07-27-2009, 01:28 AM	#12
waltpittman Registered User Join Date: Mar 2009 Location: las vegas,NV Posts: 3	I need a good gas tank for a 66 1/2 ton Do you have a good gas tank for sale in that truck.

07-27-2009, 02:04 PM	#13
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: parting a 66 3/4 ton AZ Tom, what kind of shape is the steering wheel in? How much shipped to 08753? Also looking for fleetside bed molding in good shape. Thanks. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon Last edited by ScottH; 07-27-2009 at 02:09 PM.

07-28-2009, 02:16 AM	#14
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: parting a 66 3/4 ton AZ Scott I will check on that stuff, waltpittman, yes have a good tank, you would have to pick up no shipping on a tank$25 Bubba, no pwr steering for 6 cylinders, in fact I just bought a set from another member for a freinds 6 cyl. truck. Dpowers $15 shipping on the dash & I think we have a pair of the fawn visors give me a couple days to get pics Go stranger heres a pic of the best one, 3 small dings from the inside, no rust except surface rust $175 + shipping Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

07-28-2009, 08:26 AM	#15
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	Re: parting a 66 3/4 ton AZ t korinek the tail gate looks good another member just offered me his tail gate for 100 shipped i will look at that one thanks for the reply good luck with the sale!!



Register or Log In To remove these advertisements.

07-28-2009, 11:20 AM	#16
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,435	Re: parting a 66 3/4 ton AZ PM sent

07-28-2009, 12:08 PM	#17
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: parting a 66 3/4 ton AZ Tom, r u parting the red one? Might be interested in some bed parts (if separating) and the rear bumper. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

07-28-2009, 04:16 PM	#18
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: parting a 66 3/4 ton AZ Is it a v8 truck? Does it have a fan shroud? __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

07-29-2009, 04:40 PM	#19
Rusteeze64GB Registered User Join Date: Jul 2009 Location: Mesa, AZ. Posts: 67	Re: parting a 66 3/4 ton AZ I live in Mesa, i am interested in the rear bumper if the other guy is out. What lug pattern do you have on in those wheels. I am looking for 6 lug drums. I have 8 lug drums on my 1964 GMC right now. Let me know...

07-29-2009, 04:43 PM	#20
Rusteeze64GB Registered User Join Date: Jul 2009 Location: Mesa, AZ. Posts: 67	Re: parting a 66 3/4 ton AZ Also what is the condition of that bench seat in that truck. Mine is shot. Let me know.

07-30-2009, 12:00 AM	#21
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: parting a 66 3/4 ton AZ rusteeze I have a good bench seat $75 & I have 6 lug suspension stuff & other 63-66 trucks give me a call 480-241-1318 jchav62 I dont have a fan shroud for these years ScottH not parting the red one, was just going to sell the gate if someone wanted it, the whole truck is for sale $1300 runs & drives, v8 auto, nice bed as seen, stainless strips & oak wood, nice front & rear bumpers, some rust,nice wheels. Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

07-30-2009, 09:10 AM	#22
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: parting a 66 3/4 ton AZ If I didn't have to pay for shipping on that truck I would have bought it already! PM sent Still looking for custom side body trim. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon Last edited by ScottH; 07-30-2009 at 09:16 AM.

08-02-2009, 06:29 PM	#23
70 net440 Junior Member Join Date: Sep 2003 Location: yreka, ca Posts: 270	Re: parting a 66 3/4 ton AZ I need a GOOD driver side door striker. Maybe a driver side door depending on price and shipping to 96097(Nor Cal) __________________ 63 C10 70 Coronet R/T 67 C10 70 Dart Swinger 71 K10

08-02-2009, 06:32 PM	#24
70 net440 Junior Member Join Date: Sep 2003 Location: yreka, ca Posts: 270	Re: parting a 66 3/4 ton AZ Forgot, I need this stuff for a 63. __________________ 63 C10 70 Coronet R/T 67 C10 70 Dart Swinger 71 K10

08-02-2009, 08:34 PM	#25
C10Slim Registered User Join Date: Jul 2009 Location: Needville, TX Posts: 283	Re: parting a 66 3/4 ton AZ Still have the instrument panel??

Register or Log In To remove these advertisements.