|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
12-29-2009, 11:51 AM
|
#1 |
|
Justified!
Join Date: Apr 2007
Location: Valencia, Ca
Posts: 1,366
|
Brake light switch help
OK, I have an EZ Wiring harness.....
I also have the brake swith that runs off the brake pedal to turn the lights on when I press the pedal.... The harness has 2 wires, one that read brake switch power, and one that reads brake switch...... I am assuming I hook both of these up to the normally open contacts ont he brake switch to power the lights when I press the pedal, correct? If this is wrong could someone please let me know....... Or if it is right, let me know also.......  Thanks Chad
__________________
Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny 
|
|
|
|
12-29-2009, 01:12 PM
|
#2 |
|
Msgt USAF Ret
  
Join Date: Jan 2005
Location: Kalamazoo, Michigan
Posts: 8,708
|
Re: Brake light switch help
you are correct, orange wire in white wire out. The orange wire comes from the headlight and dome circuit and the white wire goes into the steering column to the turn signal switch . This diagram is for a 67 to 72 but they are the same. I didn't notice you had a 64 at first so I posted a link below.
__________________
VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative. Last edited by VetteVet; 12-29-2009 at 02:03 PM. Reason: more info |
|
|
|
|
12-29-2009, 02:00 PM
|
#3 |
|
Msgt USAF Ret
Join Date: Jan 2005
Location: Kalamazoo, Michigan
Posts: 8,708
|
Re: Brake light switch help
Here's a link to the full diagram if you need it. Post 5
http://67-72chevytrucks.com/vboard/s...d.php?t=312351
__________________
VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative. |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
