do you have cab mounts for s-10 frame f/s?

[matthew.doan]

does anyone on here build and sell the mounts for a s10 swap?
If so do you have a good price?

Im not very good at building them

thanks matt

[rollinrooster]

Originally Posted by matthew.doan

does anyone on here build and sell the mounts for a s10 swap?
If so do you have a good price?

Im not very good at building them

thanks matt

From what ive seen most of the mounts are different depending on how low/high you want the cab. I made mine and mounted my cab about 3.5 inches off the frame. This way i dont have to make a tunnel for the driveshaft. The cab mounts are probably one of the easier parts of the swap. Once you get the cab mounted all the other fabrication has to take place. Im not trying to steer you away from doing this just want to give you a heads up that there is alot of fab. work involved in a s-10 frame swap.

[jimig1]

this is one place that makes a kit http://www.e-zchassisswaps.com/1947.htm I know some one here is using them to do the f/s