MN Parting 68 C10 Custom - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**tkeduk8r** · 05-06-2012, 03:33 PM

Well it took a week and a half, but here is the 68 that I had posted the night I brought it home. I am keeping the OD and all associated hardware. Im also keeping the tach dash (for my C30!!!), door panels, air components and glove box door. I will sell the dash panel however. Have not trid to get it running yet, but the motor does turn over freely.... Sheet metal is SHOT so I owoulnt even bother asking... Prices are marked below... Le t me know any other needs you may have.... II tried to gauge prices off of what others on this board have advertized so hope all is fair... all prices are shipped unless noted... First ill take it....

hood hinges 37.50
Rear sport bumper brackets 75
3.73 Posi rear 275 ( local pick up only)
License plate bracket and light 15
Panhard bar 25
Trailing arms 150
Tail light assemblies 25
Reverse light lenses (bullseye) 30
Tail light lenses 20
Door handles 15
Locks and ignition switch 25
Tinted door glass 200
Tinted wing windows 250
Mirror arms 35
Seat belts 10
Am radio/harness 45
Steering column 95
Steering Wheel 35
Visors 35
Rear window tinted 100
Steel wheels 20 each
T3 headlight 20
C10 emblem 10
Custom emblems 20
Stainless window trim windshield and rear window 50
Front sway bar and brackets 65
Cigar lighter 20
Front Bumper 45
4 core radiator 75

**tkeduk8r** · 05-06-2012, 03:34 PM

more pics

**tkeduk8r** · 05-06-2012, 03:36 PM

more #3

**tkeduk8r** · 05-06-2012, 03:38 PM

more #4

Chevy072 · 05-06-2012, 03:38 PM

wideside72 just posted a want to buy thread for the fron windshield stainless trim. You should PM him so he can see what you have.

**tkeduk8r** · 05-06-2012, 03:40 PM

more #5

MARIOS68PANEL · 05-06-2012, 03:40 PM

I need 3 of the pieces behind the eyebrow nuts.I guess they are the washers for the eyebrows.
I also could use rear sport bumper brakets.
shipped to 95660

shawno72 · 05-06-2012, 03:55 PM

How is the side trim?
Posted via Mobile Device

**tkeduk8r** · 05-06-2012, 03:57 PM

Mario... sent PM...
--Mike

**tkeduk8r** · 05-06-2012, 03:58 PM

shawn... trim is pretty rough... I can take a closer look when it stops raining...
--Mike

*sharpie1972* · 05-06-2012, 04:01 PM

Hi Mike, I'll take the door locks and ignition as long as they are keyed alike. Thanks, Sharpie

**tkeduk8r** · 05-06-2012, 04:03 PM

sharp... they are yours... sending PM....
--Mike

DBear · 05-06-2012, 06:56 PM

I am interested in the hood letters, headlight bezels, grill, grill marker lights. Pm sent
Posted via Mobile Device

duallyjams · 05-06-2012, 07:24 PM

interested in the tail gate trim, cab trim, bed wheel trim front bumper and dented rear bumper. zip 20751
P.S close up pic of the bulls eyes

Pmarti69 · 05-06-2012, 09:05 PM

Looking for all the door panels screws both doors and the sponge pieces (good only) behind the door handles, both doors, price shipped to 77345. Picture attached, Thanks Paul

**DaHos** · 05-06-2012, 09:14 PM

In pending condition of steering wheel ?

**derotoreut** · 05-07-2012, 02:17 PM

Do you still have 4-row radiator? What is the condition? Does it have auto trans cooler connections?

**tkeduk8r** · 05-07-2012, 02:25 PM

Dbear... sending PM

dually... trims are pretty beat up.... bumper has been cut with a torch... I personally would look for better. Lemme know if you still want them.

Pmarti69... Ill get the set ready for you and you can just take care of shipping!.... PM me for payment details

DaHos - steering whell is driver quality, but still nice with very minimal cracking if I recall. if you want more detailed pics I can do that... just PM me your email addy....

ttt...

DesertCat · 05-07-2012, 02:25 PM

How is the hood moulding?

**tkeduk8r** · 05-07-2012, 02:28 PM

droto.... The truck was originally a manual, but I think I have a 4 row for an auto for you... PM me your email and I can take some pics for you....

--Mike

**tkeduk8r** · 05-07-2012, 02:30 PM

DesertCat ---hood moulding is pretty beat up.....

--Mike

Rdrdave · 05-07-2012, 02:34 PM

Interested in mirror arms with backing plates pending pics.

bundeber · 05-07-2012, 03:04 PM

Also wondering about the 4 straight pieces of trim from the box. Are they salvageable?

Rochlow · 05-07-2012, 03:12 PM

How much for the chrome upper door panel retainer strips shipped to 05478.

**BIG ORANGE** · 05-07-2012, 04:21 PM

I need tailight wiring harness if decent! 29720 Pic,s please when you remove it.

05-06-2012, 03:33 PM	#1
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Parting 68 C10 Custom Well it took a week and a half, but here is the 68 that I had posted the night I brought it home. I am keeping the OD and all associated hardware. Im also keeping the tach dash (for my C30!!!), door panels, air components and glove box door. I will sell the dash panel however. Have not trid to get it running yet, but the motor does turn over freely.... Sheet metal is SHOT so I owoulnt even bother asking... Prices are marked below... Le t me know any other needs you may have.... II tried to gauge prices off of what others on this board have advertized so hope all is fair... all prices are shipped unless noted... First ill take it.... hood hinges 37.50 Rear sport bumper brackets 75 3.73 Posi rear 275 ( local pick up only) License plate bracket and light 15 Panhard bar 25 Trailing arms 150 Tail light assemblies 25 Reverse light lenses (bullseye) 30 Tail light lenses 20 Door handles 15 Locks and ignition switch 25 Tinted door glass 200 Tinted wing windows 250 Mirror arms 35 Seat belts 10 Am radio/harness 45 Steering column 95 Steering Wheel 35 Visors 35 Rear window tinted 100 Steel wheels 20 each T3 headlight 20 C10 emblem 10 Custom emblems 20 Stainless window trim windshield and rear window 50 Front sway bar and brackets 65 Cigar lighter 20 Front Bumper 45 4 core radiator 75 Attached Images __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's Last edited by tkeduk8r; 05-06-2012 at 03:40 PM.

05-06-2012, 03:34 PM	#2
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 68 C10 Custom more pics Attached Images __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

05-06-2012, 03:40 PM	#6
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 68 C10 Custom more #5 Attached Images __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's Last edited by tkeduk8r; 05-06-2012 at 04:02 PM.

05-06-2012, 03:40 PM	#7
MARIOS68PANEL Active Member Join Date: Mar 2005 Location: North Highlands. California Posts: 449	Re: Parting 68 C10 Custom I need 3 of the pieces behind the eyebrow nuts.I guess they are the washers for the eyebrows. I also could use rear sport bumper brakets. shipped to 95660 __________________ 67 short step 71 Custom

05-06-2012, 03:55 PM	#8
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Parting 68 C10 Custom How is the side trim? Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

05-06-2012, 03:36 PM	#3
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 68 C10 Custom more #3 Attached Images __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

05-06-2012, 03:38 PM	#4
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 68 C10 Custom more #4 Attached Images __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

05-06-2012, 03:38 PM	#5
Chevy072 Registered User Join Date: Mar 2012 Location: Clermont, Florida Posts: 1,676	Re: Parting 68 C10 Custom wideside72 just posted a want to buy thread for the fron windshield stainless trim. You should PM him so he can see what you have.

05-06-2012, 03:57 PM	#9
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 68 C10 Custom Mario... sent PM... --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

05-06-2012, 03:58 PM	#10
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 68 C10 Custom shawn... trim is pretty rough... I can take a closer look when it stops raining... --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

05-06-2012, 04:01 PM	#11
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Parting 68 C10 Custom Hi Mike, I'll take the door locks and ignition as long as they are keyed alike. Thanks, Sharpie

05-06-2012, 04:03 PM	#12
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 68 C10 Custom sharp... they are yours... sending PM.... --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

05-06-2012, 06:56 PM	#13
DBear Registered User Join Date: Nov 2008 Location: Rowlett, TX Posts: 861	Re: Parting 68 C10 Custom I am interested in the hood letters, headlight bezels, grill, grill marker lights. Pm sent Posted via Mobile Device

05-06-2012, 07:24 PM	#14
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: Parting 68 C10 Custom interested in the tail gate trim, cab trim, bed wheel trim front bumper and dented rear bumper. zip 20751 P.S close up pic of the bulls eyes __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change! Last edited by duallyjams; 05-06-2012 at 07:29 PM.

05-06-2012, 09:05 PM	#15
Pmarti69 Registered User Join Date: Feb 2012 Location: North of Houston, Tx Posts: 346	Re: Parting 68 C10 Custom Looking for all the door panels screws both doors and the sponge pieces (good only) behind the door handles, both doors, price shipped to 77345. Picture attached, Thanks Paul Attached Images __________________ Houston Area Lawman 72 GMC Fleetside (AKA: MERLIN) ZZ4 Crate Engine TH400 with Stage two kit



Register or Log In To remove these advertisements.

05-06-2012, 09:14 PM	#16
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,854	Re: Parting 68 C10 Custom In pending condition of steering wheel ? __________________ 1967 C10 SWB Owner - Rustbelt Restorations

05-07-2012, 02:17 PM	#17
derotoreut Roto Reuter thats the name... Join Date: Feb 2010 Location: Darien, NY Posts: 1,847	Re: Parting 68 C10 Custom Do you still have 4-row radiator? What is the condition? Does it have auto trans cooler connections? __________________ ~ Dan My 70 K10 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=782232 My 71 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=651394 1970 SWB Fleet K10 4X4, 5.3L LM7, 4L60E, Dakota Digital RTX, Vintage Air, Ididit tilt 1971 SWB Fleet C10 - Original SWB Arizona truck, new custom restoration project "Kick out your motor and drive while you're still alive - kick it out!" - Heart 1977

05-07-2012, 02:25 PM	#18
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 68 C10 Custom Dbear... sending PM dually... trims are pretty beat up.... bumper has been cut with a torch... I personally would look for better. Lemme know if you still want them. Pmarti69... Ill get the set ready for you and you can just take care of shipping!.... PM me for payment details DaHos - steering whell is driver quality, but still nice with very minimal cracking if I recall. if you want more detailed pics I can do that... just PM me your email addy.... ttt... __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

05-07-2012, 02:25 PM	#19
DesertCat Registered User Join Date: Mar 2011 Location: Valley of the Sunstroke, Arizona Posts: 1,210	Re: Parting 68 C10 Custom How is the hood moulding? __________________ My build thread - Devastation and Reform http://67-72chevytrucks.com/vboard/s...d.php?t=567131

05-07-2012, 02:28 PM	#20
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 68 C10 Custom droto.... The truck was originally a manual, but I think I have a 4 row for an auto for you... PM me your email and I can take some pics for you.... --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

05-07-2012, 02:30 PM	#21
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 68 C10 Custom DesertCat ---hood moulding is pretty beat up..... --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

05-07-2012, 02:34 PM	#22
Rdrdave Broke and still trying Join Date: Apr 2003 Location: Alameda, CA Posts: 562	Re: Parting 68 C10 Custom Interested in mirror arms with backing plates pending pics.

05-07-2012, 03:04 PM	#23
bundeber Registered User Join Date: Apr 2009 Location: Cody, WY Posts: 292	Re: Parting 68 C10 Custom Also wondering about the 4 straight pieces of trim from the box. Are they salvageable?

05-07-2012, 03:12 PM	#24
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Parting 68 C10 Custom How much for the chrome upper door panel retainer strips shipped to 05478.

05-07-2012, 04:21 PM	#25
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,747	Re: Parting 68 C10 Custom I need tailight wiring harness if decent! 29720 Pic,s please when you remove it. __________________ Things happen for a reason!

Register or Log In To remove these advertisements.