differences in calipers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**dennislbrooks** · 07-12-2020, 12:44 PM

Does anyone know if there are any differences in a 72 c10 front caliper and a 84 K10 front caliper other than maybe the brake fitting?

sweetk30 · 07-12-2020, 01:10 PM

1972 c-10 front https://www.rockauto.com/en/moreinfo...410073&jsn=470

1984 k10 https://www.rockauto.com/en/moreinfo...299708&jsn=609

the banjo bolt hole will be american / 72 and then metric for 84

the body is the same basic shape but you might need to grind a bit for a casting nub to clear hear and there . been to long since i played with that stuff to recall .

2 links tho have a few pics to show you .

**dennislbrooks** · 07-12-2020, 05:40 PM

sweetk30, thanks, I will try my 72 c10 calipers which because of the 59 straight axle have extra long rubber lines now. Just was hoping not to have to buy the 84 since the 72's are new rebuilt stuff. I have completed the gear change in the 84 GM 10 bolt to match the rear on my 59 GMC 3.07 to 3.73.

Yea, I looked at rockauto to see if they had different part numbers.

**dennislbrooks** · 07-17-2020, 09:32 AM

To my question about 1972 c10 calipers working on a 1984 K10 front axle.

Answer is NO.

07-12-2020, 12:44 PM	#1
dennislbrooks Senior Member Join Date: Feb 2004 Location: Williamsburg, Ohio Posts: 1,787	differences in calipers Does anyone know if there are any differences in a 72 c10 front caliper and a 84 K10 front caliper other than maybe the brake fitting? __________________ 1942 Chevy 1/2 ton Rod, 1959 GMC 1/2 ton Fleet Stepside, 1967 Chevy SWB K10, 1985 Corvette Coupe 4+3, 2015 Chevy Duramax reg cab 4WD W/T

07-12-2020, 01:10 PM	#2
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: differences in calipers 1972 c-10 front https://www.rockauto.com/en/moreinfo...410073&jsn=470 1984 k10 https://www.rockauto.com/en/moreinfo...299708&jsn=609 the banjo bolt hole will be american / 72 and then metric for 84 the body is the same basic shape but you might need to grind a bit for a casting nub to clear hear and there . been to long since i played with that stuff to recall . 2 links tho have a few pics to show you . __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.

07-12-2020, 05:40 PM	#3
dennislbrooks Senior Member Join Date: Feb 2004 Location: Williamsburg, Ohio Posts: 1,787	Re: differences in calipers sweetk30, thanks, I will try my 72 c10 calipers which because of the 59 straight axle have extra long rubber lines now. Just was hoping not to have to buy the 84 since the 72's are new rebuilt stuff. I have completed the gear change in the 84 GM 10 bolt to match the rear on my 59 GMC 3.07 to 3.73. Yea, I looked at rockauto to see if they had different part numbers. __________________ 1942 Chevy 1/2 ton Rod, 1959 GMC 1/2 ton Fleet Stepside, 1967 Chevy SWB K10, 1985 Corvette Coupe 4+3, 2015 Chevy Duramax reg cab 4WD W/T

07-17-2020, 09:32 AM	#4
dennislbrooks Senior Member Join Date: Feb 2004 Location: Williamsburg, Ohio Posts: 1,787	Re: differences in calipers To my question about 1972 c10 calipers working on a 1984 K10 front axle. Answer is NO. __________________ 1942 Chevy 1/2 ton Rod, 1959 GMC 1/2 ton Fleet Stepside, 1967 Chevy SWB K10, 1985 Corvette Coupe 4+3, 2015 Chevy Duramax reg cab 4WD W/T



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.